|
|
A very compact, powerful pump which is ideal for the hard life of working boats. This pump can lift up to 130 litres per minute (to free outlet) and is available for 12 and 24 V.
The motor has double roller bearings, and a mechanical seal virtually eliminates shaft wear. This, together with water cooling, helps to ensure many years of trouble free life with very low power consumption.
|
|
|
Quick bilge pumps are available in eight versions: four automatic units equipped with two sensors and four manual units. The distinctive feature of the automatic pump is that it can be started up automatically when the two sensors, located on the side, come into contacts with a certain quantity of water.
|
|
|
High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.
|
|
|
The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity.
|
|
|
Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.
|
|
Attwood’s pumps play no "rating games" like competitive pumps. Attwood electric bilge pumps deliver value and performance that’s built to last.
|
|
Rule's 700 and 750 G.P.H. Pumps offer increased capacity in keeping with it's 3/4" (19mm) discharge outlet. 12 Volts DC unless noted.
|
|
High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.
|
|
Commercial strength and built to last, SHURflo’s bilge pumps offer numerous hassle-free features,
such as a heavy-duty lubricated shaft seal to prevent damage during dry operation, a sleeved
waterproof lead wire, ignition protection, and anti-airlock to clear trapped air.
|
|
If there is no electrical power on board you can always rely on the little QL manual bilge pump.
It pumps 0.9 litre per stroke which equals 90 litres per minute at 100 strokes per minute.
|
|
UltimaBilge™ Pumps are the latest addition to the Johnson Pump lineup. Integration of the patented Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable compact, unit ready to install and run for years and years of unerring service.
Available in 600-800-1000-1250 GPH versions. Voltage12 V DC. For UltimaBilge™ 600GPH-100GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port.
For UltimaBilge™ 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port.
All version are delivered with a removable check valve.
The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
Dimensions: L=142 mm, W=82 mm, H=105 mm
Weight: 0.66 kg
|
|
The best choices when you are looking for high performance, heavy duty pumps designed to meet the tough demands of commercial and recreational duty. Both pumps may be automatically controlled with either an automatic switch AS888 or an electronic float switch or the new Ultima Switch.
The L1600 - L4000 may also be manually operated via the Johnson Pump bilge control panel.
Features
- Heavy duty, 12-pole double ball bearing motor
- Liquid cooled for extended motor life
- Quality engineered mechanical/lip seal
- ISO 8849 Marine and CE standards
- Easily interchangeable with most similar bilge pumps
|
|
UltimaBilge™ Pumps are the latest addition to the Johnson Pump lineup. Integration of the patented Ultima “field effect” sensing technology into the bilge pump body creates a sleek, reliable compact, unit ready to install and run for years and years of unerring service.
Available in 600-800-1000-1250 GPH versions. Voltage12 V DC. For UltimaBilge™ 600GPH-100GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port.
For UltimaBilge™ 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port.
All version are delivered with a removable check valve.
The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
|
|
UltimaBilge™ Pumps are the latest addition to the Johnson Pump lineup. Integration of the patented Ultima “field effect” sensing technology into the bilge pump body creates a sleek, reliable compact, unit ready to install and run for years and years of unerring service.
Available in 600-800-1000-1250 GPH versions. Voltage12 V DC. For UltimaBilge™ 600GPH-100GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90° smooth elbow Dura-Port.
For UltimaBilge™ 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port.
All version are delivered with a removable check valve.
The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
|
|
|
This RHINE STREAM spring pump offers to you "a Nonplusultra "in every respect. Highest pumping performance with nearly fatigue-free manipulation - practically blockage-free - very fast cleaning possibility. A long, handy hand lever makes a simple manipulation possible, also during a longer period. Large pipe unions and the special construction protect against clogging. Even foreign bodies like e.g. Rags could be through-promoted. Easy cleaning quick, maintenance - after opening the inspection cover direct entrance to the valves.
|
|
|
Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.
|
|
|
Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade "blocked" wire. Designed for pumps drawing up to 14 Amps. Model 35A and 35FA now includes a 2 year warranty.
|
|
Now backed by a 5 year warranty, the non-mercury SuperSwitch is designed for the toughest applications. Design includes marine grade 14 gauge “blocked wire”, larger float for increased buoyancy, removable base for easy servicing and a snap switch design capable of handling pumps drawing up to 20 Amps.
|
|
|
Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade "blocked" wire. Designed for pumps drawing up to 14 Amps. Model 35A and 35FA now includes a 2 year warranty.
|
|
| ... products without information |
| |
|
|
see the results for the following category
