|
|
HEAD BLINKER
The head blinker is installed at the pier head to signal its presence.
The lamp, RINA homologation, is placed at 2,5 m elevation from the deck, on the top of a hot dip galvanised steel support, aesthetically pleasant and well integrated in the overall plant. Electronic flickering and dusk switch can be provided upon request.
|
|
Red and Green Channel Markers
All above can buoys are available as green or red channel markers. Options (all nuns):
- Pickup eyes
- Internal radar reflectors
- White numerical markings
- Agency or name identification
|
|
Features:
- ABS Exterior, completely urethane foam filled and ultraviolet inhibited
- Self-righting without tackle
- Standard bands, symbols and messages included
Options:
- Internal radar reflectors
- Pickup eye built into top
- Non-standard messages
- Agency and name identification
- Swivel eyes or pipe thru for float collar applications
- Yellow cans, centerline black and white or red and white
- All cans available as green channel markers or red channel markers with nun tops
- Lighted buoys and channel markers available upon request
|
|
|
Huge buoys for open sea. They signal port entrances, isolated dangers in open sea, wide channels and offshore oil fields. The big floats garantee the mooring of big chains at high depth and at the same time the capability to host a high focal plane (from 3 to 6 meters). The lantern, solar powered, can reach long distances: at least 5 Nautical Miles.
|
|
Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy.
In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists).
All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion.
|
|
The structural characteristics of the beacon were expressly projected with the aim of reducing current and wind drag to a minimum. The big float and exclusive Resinex anchoring system, which has the characteristic of being elastic but fixed, allows the pilon very little freedom of movement in a horizontal direction yet guaranteeing elasticity (and so automatic repositioning) in the event of collision.
For this reason the Resinex elastic beacon assures correct positioning, reliability and a signalling security impossible to match with the traditional buoys. In addition, in the case of need, it can be easily removed and repositioned. It is particularly suitable for the precision marking of navigable canals or of the presence of underwater pipelines and cables or any other obstacles which could be found below water level.
|
|
| ... products without information |
| |
hite light 0.75 candelas for 60 hours
5 years life duration
|
|
|
Water activating lights are being lit automatically when getting in contact with water. The Regatta lifejackets for the professional market have a mounting solution for light in front. Can be mounted either outside- or in a moulded pocket solution. Water activating lights have according to SOLAS/USCG a guaranteed lifetime of 5 years, expir y date printed on the lights.
|
|
|
|
|
|
|
CONQUEROR
Codice prodotto: EPLD0005/6
This technologically superior new generation lifejacket light offers considerably increased visibility achieved by means of powerful white LED lamp.
- Virtually indestructible, it has a waterproof, corrosion, fire and temperature resistant case
- Its lamp never burns out
- Suitable for all types of lifejackets, easy to install and easy to use
- The light dome is positioned in such a way as not to create any shadow zone and guarantees equal light emission in all directions of the upper hemisphere
- Its compact size and light weight reduce transportation costs and allow for easy stowage of the lifejackets
- It is the only floating light in today%u2019s lifejacket lights market
- Special robust clip makes the light less vulnerable for tampering
TECHNICAL SPECIFICATIONS
Case Size - 70mm x 38mm x 37mm
Weight - Only 40 gr
Volume - Only 9.8 cm3
Material - Polycarbonate
Beam Angle - All directions of the upper hemisphere
Luminous Intensity - > 0.75 cd
Activation - Automatic or manual
Flash Rate - 50 < flashes per minute < 70
Lamp Type - Powerful white LED
Battery Type - Lithium, 5 years life (not replaceable)
Operational Life - Exceeds 8 hours
Operating Temperature -20%u02DAC to + 65%u02DAC (-4%u02DA F to 149%u02DAF)
Storage Temperature -30%u02DAC to 65%u02DAC (-22%u02DA F to 149%u02DAF)
|
|
Automatic SOLAS life jacket light, 75 cm cable between battery and light, at least 4 years. For all inflatable life jackets and foam life jackets.
The new life jacket light SECULUX CFX II functions in sea and fresh water at low temperatures, and has a manual off switch. The light and battery are separate components, there are various easy ways of fitting the light, and it is easily stowed in your life jacket.
|
|
- HL8-9M manually activates with built-in switch
- Bright, steady light of .75 cd intensity visible all directions of the upper hemisphere
- Attachment tabs accommodate up to 2.5 cm (1 inch) wide webbing
- Dragon Clip™ (included) provides secure retro-fit attachment to almost any style life jacket in a matter of seconds
- Single piece construction for ease in handling during installation or in a crisis
- Compact size for ease of storage
- Operates in fresh or salt water
- Operating life - Exceeds 8 hours @ -1°C (30°F)
|
|
Sea Spark Automatic Universal Life Jacket Light
Sea Spark is a bright wide angle LED automatic universal life jacket flashing light. It is designed to fit existing life jackets and to be specified with life jacket manufactures.
This is a long-lasting, bright, easy-to-fit, flashing LED light with easy automatic function.
|
|
- Approved to IMO SOLAS, MED, MCA and RORC requirements
- Flashing "all around" light
- Battery powered
|
|
Marine Distress LED Strobe, Light Saver attaches easily to your life ring or life vest and automatically turns on when contact is made with the water. LED strobe automatically turns off when dry. Light Saver stays afloat to increase visibility in the water.
Features:
- Automatically activates in water
- Weather and wake resistant
- LED bulb life is approximately 100,000 hours
- Constructed with double insulated wiring
|
|
Navigation light extremely durable to mechanical deterioration in
cast brass housing with lens of through coloured glass.
Input voltage: 12V AC/DC , 24V AC/DC
Integrated terminalbox - no need for extra connection box.
Designed for use in artic and tropical waters.
20 Years warranty on lantern.
|
|
Navigation light for vessels 20-50 meters
and over 50 meters in lenght.
Navigation light extremely durable to mechanical deterioration
in cast brass housing with lens of through coloured glass.
Input voltage: 24V AC/DC , on request all-round lights can
be supplied for 115/230V AC.
Integrated terminalbox - no need for extra connection box.
Designed for use in artic and tropical waters.
20 Years warranty on lantern.
|
|
Navigation light for vessels over 20 meters
Navigation light extremely durable to mechanical deterioration in aluminium with lens of through coloured glass.
Input voltage: 110/250V, 24V
Integrated terminalbox - no need for extra connection box.
Light source: 55Watt for vessels 20-50 meters, 85Watt for vessels more than 50 meters.
Designed for use in artic and tropical waters.
|
|
|
|
|
|
|
Commander Utility Helideck Lights Control System
The TEF 4500 Commander Utility Helideck Lights Control System (HLCS) is a complete control system for all helideck lights. Based upon the Commander Utility technology, this control system allows the control panel to be installed in the bridge or radio equipment room, while the enclosure with all other necessary components may be installed further away. Between the two a simple Cat 3 ++ cable ensures that the industry-proven RS-485 network provides a reliable two-way communication.
The control panel includes 5 buttons that control the perimeter lights, floodlights and windsock lights. In addition the panel includes a main power button for the entire system, an alarm acknowledge button and a button to dim the backlight. Three spare buttons are available, which may be used if additional components are installed in the control enclosure. Customer- specific text on buttons is optional.
Among the unique features of the system is the capability of connecting several control panels to the network, enabling full control and monitoring from several locations. Optionally a gateway may be installed to provide two-way communications to an external control system (NMEA-0183 compliant/proprietary), as well as three additional contactors and circuit breakers to make full use of the 8 control buttons at the control panel .
|
|
Signal Lights Control Panel 230 (115)V system
For Suez, Panama- Rov- and Signal lights
The TEF 4740 control panel serie is constructed operate and monitor suez/signal lights on all kinds of vessels. Number of circuits and mimic is specified by customer.
|
|
Navigation lights control panel for the TEF 2840/TEF 2870 Lanterns.
Main supply 24V AC/DC
Control panel series TEF4720 are designed to switch and fuse navigation and signalling lights on all kind of ships.Panels are approved and certified by DNV.
Panels are offered in three different versions, for 8, 12 and 16 lantern
|
|
|
|
see the results for the following category : 
