|
|
Features:
- ABS Exterior, completely urethane foam filled and ultraviolet inhibited
- Self-righting without tackle
- Standard bands, symbols and messages included
Options:
- Internal radar reflectors
- Pickup eye built into top
- Non-standard messages
- Agency and name identification
- Swivel eyes or pipe thru for float collar applications
- Yellow cans, centerline black and white or red and white
- All cans available as green channel markers or red channel markers with nun tops
- Lighted buoys and channel markers available upon request
|
|
|
Huge buoys for open sea. They signal port entrances, isolated dangers in open sea, wide channels and offshore oil fields. The big floats garantee the mooring of big chains at high depth and at the same time the capability to host a high focal plane (from 3 to 6 meters). The lantern, solar powered, can reach long distances: at least 5 Nautical Miles.
|
|
Red and Green Channel Markers
All above can buoys are available as green or red channel markers. Options (all nuns):
- Pickup eyes
- Internal radar reflectors
- White numerical markings
- Agency or name identification
|
|
Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy.
In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists).
All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion.
|
|
HEAD BLINKER
The head blinker is installed at the pier head to signal its presence.
The lamp, RINA homologation, is placed at 2,5 m elevation from the deck, on the top of a hot dip galvanised steel support, aesthetically pleasant and well integrated in the overall plant. Electronic flickering and dusk switch can be provided upon request.
|
|
The structural characteristics of the beacon were expressly projected with the aim of reducing current and wind drag to a minimum. The big float and exclusive Resinex anchoring system, which has the characteristic of being elastic but fixed, allows the pilon very little freedom of movement in a horizontal direction yet guaranteeing elasticity (and so automatic repositioning) in the event of collision.
For this reason the Resinex elastic beacon assures correct positioning, reliability and a signalling security impossible to match with the traditional buoys. In addition, in the case of need, it can be easily removed and repositioned. It is particularly suitable for the precision marking of navigable canals or of the presence of underwater pipelines and cables or any other obstacles which could be found below water level.
|
|
| ... products without information |
| |
Light Dimmer
Micro controlled system
Featured shortcircuit protection
Thermal protection
Radio Interference free
Led working status
Unlimited power expansion
Memory on Switch-off
|
|
The ANNAEVA push buttons type have been designed for the control of low voltage small loads such as relays, interfaces, dimmers, etc. via normally opened push buttons with momentary action.
The push buttons, depending on the model, have from 1 to 6 push buttons.
DOME TECHNOLOGY
FOR INTERIORS
VERY LOW RECESS
Protection grade IP 20
Material Stainless Steel
Spring Installation
|
|
CANTALUPI DIMMER CLL FOR LED LIGHTS
The CLL Dimmer is a driver for the light intensity control of not only L.E.D. downlights and CLL (Cantalupi L.E.D. Lighting) L.E.D. illuminating systems, but also of monochromatic L.E.D. strips and RGB systems.
The device manages 3 separate channels that can each supply up to a maximum of 6A.
Main power supply: 10-30 V DC
Stand-by absorption: 50mA
Inputs: 3
Output: 3
Input types: Push Buttons - Monitor touch screen- Serial BUS RS485
Max Load per Output: 6A
Protocols: MODBUS or DMX (on request)
Master Slave and Control management: 2 x RS485 Serial BUS ports
Installation: DIN Bar
Channels protection: 3 resettable fuses 6A with thermal protection
Power fuse: 20A blade fuse
Operating Temperature range: from 0° C to +40° C (from +32° F to + 104° F)
|
|
Elby is the wireless push button battery and maintenance free.
It can be installed everywhere for several functions for the expansion of the lighting system, buzzer installation and others without masonry works and saving time.
|
|
|
|
|
|
|
NERO is a capacitive touch switch button which relaces the standard switch and push buttons for the switching on/off function and for the control of audio/video devices but with a step ahead. Unlike the standard switch buttons, as you don't need to make holes for it, it can be used in the most unusual modes and places thus allowing to give to the boat an unique style. Its very small dimensions enable space saving and give full to the interior designers.
NERO can be set as switch or push button and is available in several models, from one up six switches, it can disappear behind whatever surface or can be provided with a frame of different colours, versions and materials. It is also being properly designed in order to fit perfectly inside plates and material of the main electric productors suppliers.
Among the new models very interesting are NERO DIMMER an electronic light control provided with dimmer device at a low voltage and NERO DIMMER LED the electronic dimmer at low consumption for power led.
|
|
The Smartswitch NavLight monitor (NV-8000)will monitor and control all the Navlights and alarm when there is a fsulty or blown light. Navlights can be put into 6 programmable groups, twilight sensor option, all lights are name programmable,
Also available is the (NV-2000) will monitor up to 32 lights.
|
|
|
|
|
|
|
Power production and climate control are among your boat's most critical components. Naturally, you will install the highest quality systems, to work seamlessly in concert.
High energy demand systems like air conditioning, stabilizers and bow thrusters are becoming more common on modern vessels. With multiple staterooms, power configurations and night-versus-day demands, properly loading your generator set can be challenging. Without proper load management, the generator set can run underloaded, leading to unnecessary maintenance issues.
To address these issues, the Technicold Linear Load Bank features variable outputs to manage electrical load on each individual 3 phase leg. This capability balances all phases in a widely variable load share solution. The ideal bank for a boat with multiple AC configurations, the TECHNICOLD Linear Load Bank is the only fresh water cooled, non-modular load bank commercially available.
By supplying a supplemental electric load to the generator, TECHNICOLD load banks ensure that the generator is always properly loaded. Engine activity is easily monitored with the Load Bank Controller, which tracks each leg of power from the ship's electrical panel. The digital controllers analyze the data and transmits commands to the load controls. If the vessel's power usage fluctuates, the controller uses pre-programmed parameters to stage up to three electric loads. It will even provide load shedding as needed.
Protect your boat's most important assets; insist on TECHNICOLD By Northern Lights.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
