|
|
Stay Adjusters allow wire rigging systems to be altered by means of a clevis pin. All models constructed from stainless steel strip with different sizes and spacings.
The fine tune adjuster R4394 is a must for hotshot dinghy crews. Pivoting foot utilising three holes always gives a straight line between shroud and full anchorage point, plus a fine 2mm adjustment.
R4392 Shroud "SPINI" roller acts as guide for sheet when reaching. Fits all RWO shroud adjusters with 5mm, (3/16in.) holes.
Shroud Levers improve downwind performance by allowing the mast to lean forward and permitting the boom to be squared off. Another use of the lever is to instantly slacken the tension in standing rigging; both on boats and hang gliders. Two models are available, both having an easy to grip handle and adjustable throw. Both levers are strong enough for sailboats up to 5.9m. (18ft.) long and can be safely used in winds up to 20 knots.
|
|
|
|
|
|
|
New Leech Tensioners - FTLT / PALT
FTLT: The Fish-Tail Leech Tensioner was originally designed as a tensioning system for America’s Cup mainsails. Light-weight, sturdy and easy to use, the FTLT is also being used by racing yachts from 40-90ft.
PALT: By designing an alternative head-cap the same tensioning components can now be used on larger yachts. The PALT (Plastic Adjusting Leech Tensioner) has grooves which allow lashing to pass either side of the tensioning screw, securing the batten firmly in the pocket.
FTLT - used with CT33 battens
PALT - used with CT33, CT33S, CT36 battens
Key Features:
- Made from tough acetyl plastic
- Lightweight and strong
- Titanium hex-head adjusting screw
- Leech end-plugs with 45mm shank available in 3 sizes
- Extended leech end-plugs with extended head/shank can be used for additional batten adjustment or lengthening [available on request]
- Batten can be tensioned on deck (maximum adjustment: 40mm)
- Thread length for FTLT: 40mm
- Thread length for PALT: 60mm or 100mm
- Weight: 75 grams
|
|
Hardware for CT22 Battens: Tensioners
RSLT: Rocket-Style Leech Tensioner is light-weight, adjustable and easy to use. It can be used as a Leech Tensioner (on a bolt-rope mainsail) and as a Luff Receptacle with closed-leech mainsails. The RSLT is designed to fit CT22 battens and is suitable for yachts from 40 – 55ft long.
Key Features: RSLT
- Made from carbon fibre
- Ultra lightweight and strong (63 – 70 grams)
- Designed to fit over CT22 battens for luff or leech tensioning
- Can be used with closed leech or open leech pockets
- Adjusting screw thread for tensioning batten on deck or while sailing (maximum adjustment: 30mm)
- Fish-tail shaped end for webbing to hook over, holding fitting and batten firmly into batten pocket
|
|
|
|
|
|
|
New Leech Tensioners - FTLT / PALT
FTLT: The Fish-Tail Leech Tensioner was originally designed as a tensioning system for America’s Cup mainsails. Light-weight, sturdy and easy to use, the FTLT is also being used by racing yachts from 40-90ft.
PALT: By designing an alternative head-cap the same tensioning components can now be used on larger yachts. The PALT (Plastic Adjusting Leech Tensioner) has grooves which allow lashing to pass either side of the tensioning screw, securing the batten firmly in the pocket.
FTLT - used with CT33 battens
PALT - used with CT33, CT33S, CT36 battens
Key Features:
- Made from tough acetyl plastic
- Lightweight and strong
- Titanium hex-head adjusting screw
- Leech end-plugs with 45mm shank available in 3 sizes
- Extended leech end-plugs with extended head/shank can be used for additional batten adjustment or lengthening [available on request]
- Batten can be tensioned on deck (maximum adjustment: 40mm)
- Thread length for FTLT: 40mm
- Thread length for PALT: 60mm or 100mm
- Weight: 75 grams
|
|
Hardware for CT22 Battens: Tensioners
RSLT: Rocket-Style Leech Tensioner is light-weight, adjustable and easy to use. It can be used as a Leech Tensioner (on a bolt-rope mainsail) and as a Luff Receptacle with closed-leech mainsails. The RSLT is designed to fit CT22 battens and is suitable for yachts from 40 – 55ft long.
Key Features: RSLT
- Made from carbon fibre
- Ultra lightweight and strong (63 – 70 grams)
- Designed to fit over CT22 battens for luff or leech tensioning
- Can be used with closed leech or open leech pockets
- Adjusting screw thread for tensioning batten on deck or while sailing (maximum adjustment: 30mm)
- Fish-tail shaped end for webbing to hook over, holding fitting and batten firmly into batten pocket
|
|
|
|
