|
|
|
With the Transas T-55 AIS you can display any AIS equipped vessel within VHF range on any type of AIS adapted display system. Information transmitted from vessels fitted with AIS Transponders includes name, call sign, position, heading, speed, destination, type and size of vessel. The Transas T-55 AIS is compatible with any chart/ECS and radar system capable of accepting standard NMEA 0183 AIS sentences. The installation is quick and simple, requiring only the connection to a VHF antenna, GPS antenna and computer (PC). Transas T-55 AIS is the perfect complement to a radar and has an international standardized interface to Transas Electronic Chart System (ECS) or Navi-Radar 4000 (Chart Radar).
|
|
|
The SI-60B is black box type receiver capable of displaying both class A and class B AIS information on NAVIS series chart plotters, other manufacturer's chart plotters or PC based navigation software - in real time. The unit features both RS-232 and RS-422 I/O ports and user selectable baud rate for ease of installation.
|
|
RA-2500 is a dual channel VHF receiver.
It will continuously monitor ship information from all AIS-equipped ships within VHF range.
Easy readable ship information from the built-in display: Name, MMSI, position, course and speed over ground as well as static and other voyage related information.
|
|
Just released at METS2009, the 2RxPRO is a TRUE DUAL CHANNEL AIS Receiver, with integral NMEA0183 mux and NMEA AND USB outputs. The unit features industry-leading, pro-quality sensitive digital radio receivers that monitor both AIS channels simultaneously, so you do not miss messages or have to wait for the data to be eventually received (as is the case with all single channel AND switched single channel receivers.) No setup is required - just install a suitable VHF antenna, 9-28v power (only 1watt at 12v) and connect to your PC or plotter using the USB and NMEA0183 outputs. And if you are running out of NMEA ports, the 2RxPRO can also take in a NMEA feed at 4800 baud from another instrument, and multiplex the data in with the AIS data going off to your plotter - so you don't even need another NMEA port to install it!
The 2RxPRO features a very robust, professional-grade water-resistant metal case, and integral power and NMEA cables to make installation as easy as it gets!
|
|
| ... products without information |
| |
The paperless receivers are dedicated, compact and
economical dual channel NDBP receivers using FEC techniques
for reception of navigational warnings, gale warnings, ice reports,
search and rescue information, and weather forecasts within
200 to 400 miles offshore. It monitors simultaneously 518 kHz
and a selectable secondary frequency either the national
490 kHz or the 4209.5 kHz for long range services.
NAVTEX messages are displayed on an eight inch colour TFT
screen. Background and foreground colours as well as font
type are user-selectable to offer a message presentation which
suits the very best clarity under all light conditions.
The simple to use receivers offer coloured headings to clearly
identify new received messages. Stored messages can be
sorted and displayed as well as printed by station ID and
message category.
|
|
- Full meet latest IMO
- 3 receiving frequencies
- Printerless type
- Easy Installation
- Easy operation
- External Printer (Option)
- Navtex data export function for Integrated Navigation System (ECDIS or etc.)
|
|
Standard Features:
Water proof construction IP6
Simultaneously operates at 518 kHz and either at 490 kHz or at 4209.5 kHz
Compliant with IMO MSC.148(77), ITU-R.M 540-2, M.625-3, IEC-61162 Type Approval as MED (GMDSS requirements)
5.6 inch bright WVGA LCD
Compact configuration consisting of Display/Receiver and Antenna
Printer interface
Messages output in ASCII characters via RS-232C for connection to serial printer
Stores more than 200,000 characters in memory
Low power consumption
Nav data display acts as NMEA repeater for GPS or other instrumentation
|
|
| ... products without information |
| |
|
|
|
|
|
Flexible Rugged High-Performance GNSS Receiver
Designed by our GNSS experts, the new ProFlexâ"¢ 500 is a powerful positioning solution that delivers state-of-the-art RTK in a rugged, highly integrated receiver design. Embedded BLADEâ"¢ technology ensures powerful RTK performance and a patented way to use multiple GNSS constellations for high-accuracy positioning and surveying solutions.
Rugged and Integrated Design
The ProFlex 500 offers a unique set of embedded communication features for maximum flexibility and resistance to bad weather. It contains completely integrated GSM, UHF and Bluetooth for wireless communications as well as Ethernet, RS-232/422 and USB connections. All output connections are optically isolated to prevent problems with installation in shipboard applications.
Made to withstand harsh environments, its environmental characteristics include: 100% condensing humidity proof, salt mist resistant, shock and vibration resistant as defined in military standard MIL STD 810 F. The receiver has an extremely rugged aluminum housing and is IP67 rated.
Flexible Solution
The ProFlex 500 innovative design makes it the ideal solution for onboard system integration - it can be easily mounted on a ship or on a vehicle for sea or land operations - and it is also a perfect backpack rover or base station solution for precise land surveying.
Adaptable to most any specific positioning usage, the ProFlex 500 is the answer for users looking for a single GNSS receiver for multiple applications. It is for example, a perfect solution for the hydrography services and dredging companies performing both onshore and offshore RTK surveys. ProFlex 500 enables optimal equipment use and simpler deployment among survey crews.
High-end Performance
ProFlex 500 offers GPS+GLONASS+20 years of field-proven Magellan technologies. It is made to withstand harsh environments, and gives you maximum flexibility on sea and land.
Fast initialization and centimeter accuracy at long-range
Unique BLADE technology for full benefit of any available GLONASS corrections
Unique built-in communication features
Rugged design for demanding work environments
Advanced multi-path mitigation and robust signal tracking for maximum data reliability
Interoperability with any vendor's reference station transmitting GPS+GLONASS L1/L2
|
|
Max Power’s radio remote control is designed to work with the entire range of Max Power tunnel and retractable thrusters. The remote control can also be used to operate other onboard equipment such as: windlasses, passerelles, cranes, etc.
* Supports up to 8 independently controlled channels
* Each receiver can switch four channels (12/24V 5A)
* Each transmitter can handle two receivers (8 channels)
* Digital recognition avoids accidental activation of other systems
* Available in 868Mhz (EU conformity)
* Available in 915Mhz (US conformity)
* Transmitter power supply: 2 lithium batteries 3V (CR2430) included
* Receiver power supply: 12/24V DC
* Zero power consumption when in standby mode (transmitter)
* Easy to install and set-up, simple to use
* Splash proof
|
|
FLOATING TRANSMITTER
In case of fall into the water, the transmitter will fl oat allowing an easy
and prompt salvage.
|
|
|
|
|
|
|
The installation of a radio remote control system does not imply any modification of the existing control station.
Thanks to this transmitter, extremely easy in handle, equipped with commands buttons well protected against unintended manoeuvres, you will be able to manage the ship by your self, evaluating at best the space at disposal.
NAVIGATION IN NARROW PASSAGES
The harbour and the channels navigation, are some of the most delicate phase for the skippers. The radio remote control IMET will allow you to manoeuvre the boat by yourself, from the most suitable position. A traditional stationary control console does not give the same degree of accuracy and efficiency.
MOORING
IMET radio remote control allows you to moor by yourself in absolute safety conditions, from any place of the boat, controlling the Right and Left engines, the bow and stern propeller. Choosing the most suitable point of view, you will approach comfortably the harbour’s wharf.
TO BITT THE ROPES
Keeping the complete control of your boat at your fingers, you can approach the wharf and recover the ropes with extreme simplicity,
adjusting the trajectory from you transmitter with small engine corrections. This high control capacity will also reduce the possibility of small collisions.
ANCHORAGE
Standing at the bow, you will be able to raise or drop the anchor, keeping an eye at the safe anchorage and at the presence of other anchors.
|
|
SAFETY KEY
This extractable “contact less” key allows the use of the radio remote to
authorised personnel only. The key extraction stops any operation.
|
|
The Control Box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. Degree of protection IP 56 - protection against deckwater.
|
|
Wireless remote control:
With a radio control installed you will have full control of windlass operation where ever you are on board. The control consists of a transmitter and a receiver. With the AutomaticDownTM function the windlass will run automatically for 25 seconds before stopping. To enable the AutomaticDownTM just press the DOWN button on the receiver. To stop the AutomaticDownTM at any time, press DOWN once on the receiver.
|
|
| ... products without information |
| |
The Control Box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and/or pierce the container, as all the terminals and the panel for the electrical connections are perfectly accessible from the outside.
Outer construction in self-extinguishing polyester resin, resistant to shock and marine corrosion. Degree of protection IP 56 - protection against deckwater.
|
|
Wireless remote control:
With a radio control installed you will have full control of windlass operation where ever you are on board. The control consists of a transmitter and a receiver. With the AutomaticDownTM function the windlass will run automatically for 25 seconds before stopping. To enable the AutomaticDownTM just press the DOWN button on the receiver. To stop the AutomaticDownTM at any time, press DOWN once on the receiver.
|
|
| ... products without information |
| |
|
Weatherforcast with symbols. Air pressure reading with history. Additional barchart history graphic. Indoor and outdoor (wireless) temperature and humidity. Radio controlled clock with alarm and moonphase. Wall mount or desktop. Measure 90 x 185 mm, BARIGO item no. 807.
|
|
|
This complete weather station comes equipped with outdoor sensors that operate on solar power which provides easy installation. This weather forecaster comes with a PC link so you can download up to date information gathered by various sensors. It comes with various sensors to monitor temperature and humidity along with an anemometer to measure wind speed and a self emptying rain gauge.
|
|
| ... products without information |
| |
|
Clock with radio sectors BARIGO item no. 1650FS, solid brass case Ø 220x x70 mm, white dial Ø 150 mm, classic design. Matching ship's bell clock and matching barometer available.
|
|
 see the results for the following category : Boat alarms |
|
|
