|
|
Cover in only one unit with the speakers in white ABS UV resistant Splash-proof and saline resistant.
Two ways system with polypropylene cone
Built-in magnet
In robust ABS and corrosion resistant.
Frequency 50 ? 16.000 Hz
88 dB/w/m efficiency
|
|
* NdFeB magnet.
* ASTM salt spray 500 hours tested + ASTM UV resistance 600 hours tested.
* Water and dust protected to IEC529 IP67.
* Ambient temperature -50°C ~ +100°C for the harshest atmospheres.
* Corrosion resistant, chemical resistant, and re resistant.
* Bracket or recessed mounted for ceiling or wall.
* Excellent for both marine applications and other industrial enviroments.
* 12 watt 100 & 70 volt line. Tappings & 8 via 7-core cable.
* Equipped with rust-proof V4A exterior hardware.
* Available in Light Gray (RAL 7035) & White (RAL 9016).
|
|
* Very high efficiency.
* High power 30 watt rms.
* 100V & 70V transformer.
* ASTM salt spray 500 hours tested.
* ASTM UV resistance 600 hours tested.
* Ingress protected to IEC529 IP67.
* Equipped with rust-proof V4A exterior hardware.
* 6-core multi-tapping glanded cable.
* Standard colour is White (RAL 9016).
|
|
* Ideal for both marine and industrial applications. Used by various shipyards worldwide.
* ASTM salt spray 500 hours tested.
* ASTM UV resistance 600 hours tested.
* Water protected to IEC529 IP66.
* Very high e efficiency.
* Two cable entries to enable loop in loop out installation.
* Equipped with rust-proof V4A exterior hardware.
|
|
* NdFeB magnet.
* ASTM salt spray 500 hours tested + ASTM UV resistance 600 hours tested.
* Water and dust protected to IEC529 IP67.
* Ambient temperature -50°C ~ +100°C for the harshest atmospheres.
* Corrosion resistant, chemical resistant, and re resistant.
* Bracket or recessed mounted for ceiling or wall.
* Excellent for both marine applications and other industrial enviroments.
* 6 watt 100 & 70 volt line. Tappings & 8 via 6-core cable.
* Equipped with rust-proof V4A exterior hardware.
* Available in Light Gray (RAL 7035) & White (RAL 9016).
|
|
|
Full size box speakers with a two-way vented post design offer full range response. The low magnetic field design lets you mount them anywhere. Polycarbonate gimbal mounting brackets are included. The 5.25” polypropylene main cones provide maximum power of 100 watts per speaker.
|
|
|
Mount these full-sized speakers out of the way under the gunwale, where they%u2019re protected from the elements, yet close enough to deliver rich, full sound. The molded, one-piece plastic grill protects the speaker components from splash and spray. The two-way vented port design offers full range response. Peak power 200 watts /pair.
|
|
|
MA-4054 is a 4” cone size two-way coaxial speaker. This speaker featured a rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames, to provide years of trouble-free service. Ultra-low magnetic field speakers eliminates the problem of speakers magnets affecting navigation equipment such as compasses and autopilots. Peak power handling capability 80 watts/pair
|
|
|
|
|
|
|
High Power, multi component, round speakers with a clean low profile, flush mount and full range audio performance.
Waterproof and corrosion-proof
Coated internal wiring for long life
Polypropylene cone and mylar tweeter
Stainless Steel Grille stand up to harsh marine effects
Heavy Duty ABS Plastic frames
HIGH POWER, HIGH PERFORMANCE MARINE SPEAKERS
Platinum Series speakers are high-powered performers that offer superior sound for discriminating listeners who demand the very best quality audio. They are the first truly waterproof, full-range marine speakers to offer the performance of a home stereo system. Constructed to withstand the most severe effects of sun and saltwater, Platinum speakers are ideal replacement or upgrade speakers for those who want increased audio power, smooth response and minimum distortion. Series With a sleek, contemporary style that is beautifully proportioned and meticulously finished, Platinum Series speakers complement any salon, stateroom or above-deck mounting. Aluminum grills, coated internal wires, polypropylene cones and mylar tweeters assure you of long-lasting performance and good looks.These speakers are guaranteed to provide the best-sounding marine audio in their class.
|
|
|
The MA3013 is a 3%u201D Flush mount speaker are great for installations where mounting space is limited. This compact speaker is designed to be used alone or conjunction with the MS series Subwoofer systems. Ideal for mounting in flybridge overheads, smaller cabins or wherever space is at a premium.
|
|
|
Contemporary design. These 6” speakers offer superior sound quality and an easy, low profile mount designed to complement the décor of even the finest yachts. These full range, two-way speakers mount very flush with a minimum protrusion. Grills cover the mounting screws for a clean, professionally-mounted appearance. No holes are required for the mounting screws, and it is not necessary to access the rear of the mounting surface. The self-contained clamps automatically grip the inside of the mounting surface.
|
|
|
The MA-8505 is a 5" waterproof, ultra low magnetic field 200 watt speaker available in white or black color to compliment the exterior or interior of any yacht. These three way speaker is perfect for replacement or upgrade of existing speakers and the magnets will not interfere with navigation equipment.
|
|
|
|
|
|
|
GreenSound is a fantastic sound system thet turns walls and ceilings into sources of sound. The boards can be easily mounted directly into the wall or ceiling behind whatever surface (wood, fiberglass,plaster or other finishing material).
As the Greensound boards are provided with a weatherproof surface when appropriately sealed can withstand wind and weather so they are also perfect for outdoor applications.Furthermore as this product is proof against moisture it can be ideally mounted in baths and wellness rooms, as shown aside.
the surround sound of music and speech and the impressive richness of sound generated by greensound are really surprising and please even the ears of demanding music enthusiasts.
it is able to reproduce room-filing £-D acoustics up to the Dolby Surround/dts standard and doesen't affect your living spaces with visible boxes and cables. Your romm surroundings must not be oriented around the audio/video systems and you can therefore profit by un unlimited design freedom.
|
|
- Waterproof 165 mm dual polypropylene cone speaker
- Magnetically shielded enclosure
- Non-oxidising (in salt water) and UV radiation resistant cone
- Special speaker cover made from ABS synthetics
- Frequency response: 30 ~ 18,000 Hz
- Efficiency: 89 dB/W/m
|
|
- Waterproof 165 mm polypropylene cone woofer
- 19 mm PEI dome tweeter
- Magnetically shielded enclosure
- Non-oxidising (in salt water) and UV radiation resistant cone
- Special speaker cover made from ABS synthetics
- Frequency response: 30 ~ 20,000 Hz
- Efficiency: 89 dB/W/m
|
|
FUSION’s Marine Speakers are designed and engineered from the ground up to incorporate state of the art audio innovation never seen before in marine speakers.
- Comply with ASTM Standards for UV Stability and Salt/Fog Resistance
- Comply with IP65 Waterproof and Dust Standards
True Marine Protection
Designed to withstand the harsh marine environment and comply with International ASTM Standards for UV Stability (ASTM-D4329) and Salt/Fog Resistance (ASTM-B117)
True Waterproof Design
Complies with IP65 Waterproof and Dust Standards and features a fully sealed cross-over, magnet and tweeter housing with waterproof cone and surrounds
|
|
FUSION’s Marine Speakers are designed and engineered from the ground up to incorporate state of the art audio innovation never seen before in marine speakers. The 7” Marine Speakers come complete with three grille options (cloth, standard and sport) as well as three gel badge options.
- Complies with ASTM Standards for UV Stability and Salt/Fog Resistance
- Complies with IP65 Waterproof and Dust Standards
- Sold complete with three grille options in each box
|
|
FUSION’s Marine Speakers are designed and engineered from the ground up to incorporate state of the art audio innovation never seen before in marine speakers. The 6” Marine Speakers come complete with three grille options (cloth, standard and sport) as well as three gel badge options.
- Comply with ASTM Standards for UV Stability and Salt/Fog Resistance
- Comply with IP65 Waterproof and Dust Standards
- Sold complete with three grille options in each box
True Marine Protection
Designed to withstand the harsh marine environment and comply with International ASTM Standards for UV Stability (ASTM-D4329) and Salt/Fog Resistance (ASTM-B117)
True Waterproof Design
Complies with IP65 Waterproof and Dust Standards and features a fully sealed cross-over, magnet and tweeter housing with waterproof cone and surrounds
|
|
Woofers: Injection-molded mica-filled polypropylene cone bodies with synthetic rubber surrounds, specifically formulated for marine duty. Vented motor with marine-grade stainless steel rear diffuser plate. Precisely engineered dust cap profile for smooth upper-end response. Marine-grade, synthetic fiber spider with progressive roll design. DMA-optimized long-excursion design for enhanced output, bass extension and power handling. UV-resistant polymer baskets encapsulate motor structure. Optimized for tower-mount (small enclosure).
Tweeters: High-effiiciency design with oversized neodymium motor system. 1-inch silk dome diaphragm with specially formulated treatment to withstand UV and salt-spray exposure. Ferrofluid-cooled and damped for improved response and power handling. Surface and flush tweeter mounting fixtures are included. UV-resistant polymer housing and grille.
|
|
Woofers: Injection-molded mica-filled polypropylene cone bodies with synthetic rubber surrounds, specifically formulated for marine duty. Vented motor with marine-grade stainless steel rear diffuser plate. Precisely engineered dust cap profile for smooth upper-end response. Marine-grade, synthetic fiber spider with progressive roll design. DMA-optimized long-excursion design for enhanced output, bass extension and power handling. UV-resistant polymer baskets encapsulate motor structure. Optimized for cockpit-mount (infinite baffle).
Tweeters: High-effiiciency design with oversized neodymium motor system. 1-inch silk dome diaphragm with specially formulated treatment to withstand UV and salt-spray exposure. Ferrofluid-cooled and damped for improved response and power handling. Surface and flush tweeter mounting fixtures are included. UV-resistant polymer housing and grille.
|
|
Woofers: Injection-molded mica-filled polypropylene cone bodies with synthetic rubber surrounds, specifically formulated for marine duty. Vented motor with marine-grade stainless steel rear diffuser plate. Precisely engineered dust cap profile for smooth upper-end response. Marine-grade, synthetic fiber spider with progressive roll design. DMA-optimized long-excursion design for enhanced output, bass extension and power handling. UV-resistant polymer baskets encapsulate motor structure. Optimized for cockpit-mount (infinite baffle).
Tweeters: High-Efficiency design with neodymium motor system 1-inch silk dome diaphragm with specially formulated treatment to withstand UV and salt-spray exposure. Ferrofluid-cooled and damped for improved response and power handling. Permanent grille-mounted design ensures optimal high-frequency performance with no loss of woofer radiating area.
|
|
Woofers: Injection-molded mica-filled polypropylene cone bodies with synthetic rubber surrounds, specifically formulated for marine duty. Vented motor with marine-grade stainless steel rear diffuser plate. Precisely engineered dust cap profile for smooth upper-end response. Marine-grade, synthetic fiber spider with progressive roll design. DMA-optimized long-excursion design for enhanced output, bass extension and power handling. UV-resistant polymer baskets encapsulate motor structure. Optimized for tower-mount (small enclosure).
Tweeters: High-Efficiency design with neodymium motor system 1-inch silk dome diaphragm with specially formulated treatment to withstand UV and salt-spray exposure. Ferrofluid-cooled and damped for improved response and power handling. Permanent grille-mounted design ensures optimal high-frequency performance with no loss of woofer radiating area.
|
|
A tough and reliable extension speaker for VHF radios. Ideal for sail or power boats. Can be surface or flush mounted.
Corrosion proof
UV resistant ABS construction
UV resistant ABS construction
Attractive blister packed
Solderless connector
|
|
Waterproof box speakers Bass reflex designed are suitable for the area with high moisture and corrosion suck as SPA, sauna, garden...etc. It is not only for out door but also in door. For outdoor application, powder coating stainless steel bracket included. U.V. stabilized ABS plastic box with cloth or aluminum grill, strike resistant and not easy to brittle in harsh environments.
Features & Specifications :
- Waterproof and corrosion proof designed for permanent out-door mounting in saltwater environment
- U.V. stabilized for protection against damage from sunlight
- Waterproof aluminum mesh and stainless bracket
|
|
Have you been confront an installation problem because of depth? Greness's Super Thin series can solve it for you. Characteristics included super thin、sizes from 3" to 6"、easy fit、 grill and basket are integral designed. Mounting depth range from 35mm to 51mm. Brutal sun and corrosive saltwater have no effect. They outlast ordinary speakers in the marine environment and carry a 2-year warranty.
Features & Specifications :
- Waterproof and corrosion proof designed for permanent out-door mounting in saltwater environment can be hosed down when cleaning boat
- U.V. stabilized for protection against damage from sunlight
- Waterproof and corrosion proof mica injection cone with TPU edge
- Corrosion proof silicone coated terminal wire
|
|
Waterproof tweeter series that features can be match any woofer. Low magnetic field design. Using high density NEO magnet for large power. Surface mounting with 3 feet speaker wire. Black and white is available.
Features & Specifications :
- 1/2" Waterproof Mylar dome
- High density neodymium magnet
- Surface and angle mounting
- Speaker with 3 feet wire
|
|
|
|
|
|
|
Waterproof 6000 integral series that features an elegant style. They are extremely easy to install 、grill and basket are integral designed with low magnetic field developed. The popular 6000 series are round speakers with main cone sizes of 4",5",and 6".Each has a dual cone / coaxial design for full range frequency response. They handle up to 80 watts peak power per pair. The contemporary white and black design will match virtually any boat. Brutal sun and corrosive saltwater have no effect. They outlast ordinary speakers in the marine environment and carry a 2-year warranty.
Features & Specifications :
- Designed as ultra low magnetic field speakers to insure minimum interference with compasses and autopilots
- Waterproof and corrosion proof designed for permanent out-door mounting in saltwater environment can be hosed down when cleaning boat
- U.V. stabilized for protection against damage from sunlight
- Waterproof and corrosion proof mica injection cone with TPU edge
- Corrosion proof silicone coated terminal wire
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
