|
|
SEAJET SPEED FINISH is an environmentally friendly alternative to antifoulings with the following benefits:
- Keeps the underwater hull ultra-smooth and minimises hull friction for faster sailing and racing.
- Provides up to 3-years protection against fouling in both fresh and salt water environments.
- Contains no biocides and is not harmful to marine organisms.
- Fouling may loosely attach but is easily removed by water movement or washing.
- Brilliant colours available when applied over SEAJET SPEED BINDER COAT.
|
|
SEAJET 039 PLATINUM is a tin-free antifouling paint offering the ultimate in performance. Based on new SPC resin technology from Japan it is suited to all fouling environments and ideal for application to SUPERYACHTS and boats in the highest fouling areas. It is suitable for all types of boat, (except aluminium) even at speeds of up to 40 knots. Advantages include:
- Ultimate performance offering equivalent performance to tin (TBT) based antifouling
- Suitable for all boats up to a speed of 40 knots
- Apply extra coats for up to 3 years protection
|
|
SEAJET 037 COASTAL is a hard, tin-free antifouling paint suitable for all types of pleasure craft
Advantages include
- Suited to all vessels, from yachts to fast motorboats
- Eco-sensitive and meets all environmental requirements.
- Good performance in coastal and inland waters and at an economical price.
- Suitable for drying moorings.
|
|
SEAJET 034 EMPEROR is a high performance, self polishing antifouling. It comes in pure, bright colours and is ideal for boats upto 40 knots. SEAJET 034 EMPEROR contains new, highly effective biocides to boost performance against slime and weed for excellent performance.
Advantages include:
- Very high performance for the discerning motorboat owner and yachtsman
- Colours are pure and bright
- Suitable for all boats up to a speed of 40 knots
- No risk of galvanic corrosion on aluminium surfaces.
|
|
SEAJET 033 SHOGUN is a high performance, tin-free antifouling paint for all types of pleasure craft.
Advantages include:
- Award winning performance
- Two coats will last up to two seasons in Northern European waters
- A maximum speed up to 40 knots - Eco-sensitive and meets all environmental requirements
|
|
SEAJET 031 SAMURAI is a self-polishing antifouling paint for all types of pleasure craft
Advantages include:
- Performance cruising antifouling.
- A maximum speed up to 40 knots.
- Eco-sensitive and meets all environmental requirements.
|
|
CUPROTECT PROFESSIONAL APPLICATION - ON STEEL
Cuprotect® can only be applied by a Cuprotect® Approved Installer. They are fully trained on our products and equipment and their work is covered by our 5-year guarantee.
|
|
UltraGlozz® is a sensational polish for boats, rvs, cars, mc´s and many other areas around your home that need to be treated for easier cleaning and maintenance. UltraGlozz® keeps the surface clean, Nothing sticks to a surface treated with UltraGlozz® - not even black streaks on your freeboard. All you need to keep the surface clean is a bucket of water with detergent and a brush.
UltraGlozz® cleans (without abrasives) without making swirl marks, polishes and seals for up to 18 months.
Use UltraGlozz® on glossy plastic, gelcoat, chrome, aluminium, brass, copper, silver, glass, mirrors and painted surfaces. UltraGlozz® even makes stainless maintenance free without fingermarks.Try to polish your worn plexiglas windows - now they look brand new. UltraGlozz® is easy to use and leaves absolutely no hard to remove residues on hard to reach surfaces
|
|
Cuprotect® is a unique fouling control system, not paint, using the metallurgical, non corroding properties of copper and copper alloys to provide unmatched bio-fouling protection, even under the most stringent conditions.
Cuprotect® comprises, in essence, an epoxy resin primer layer to provide a tough, stable base with a strong bond to the hull substrate. This is followed by the binder coat incorporating specially selected thixotropic agents to ensure optimum bonding between the primer and the final, sprayed-on outer layer of granular copper nickel alloy.
In addition, because Cuprotect® provides an impermeable layer between water and the hull it helps protect against rust, corrosion and osmosis. Because of the shape of the copper particles, Cuprotect® is non-conductive and therefore eliminates any concern about galvanic activity.
Cuprotect® is suitable for application to every type of hull in GRP, steel, ferro cement. Many wooden hulls are also suitable,
|
|
Classic Antifouling
• Self-polishing, for sail and pow er boats (< 40 k nots), except aluminium hulls.
• Moderate fouling areas.
• Suitable for drying berths.
• Good compatibility.
• Coverage ratio : 10 m 2 /litre.
• Minimum temperature during application : + 5°C.
In 20°C ambient temperature, w ait 2 ½ hours before overcoating
and 4 hours before launching.
Performance antifouling
• High performance, with gradual polishing ratio, for sail and power boats (< 40 knots), except aluminium hulls.
• High fouling areas.
• Suitable for drying berths.
• Good compatibility.
• Coverage ratio : 8.80 m2/litre.
• Minimum temperature during application : + 5°C.
In 20°C ambient temperature, wait 2 ½ hours before overcoating
and 4 hours before launching.
Racing antifouling
• Ultimate performance self-polishing antifouling, ideal for serious racers and fast powercruisers (< 70 knots), except aluminium hulls.
• Very high fouling areas.
• Very bright colours.
• Sandable, suitable for drying berths.
• Good compatibility.
• Coverage ratio : 11.20 m2/litre.
• Minimum temperature during application : + 5°C.
In 20°C ambient temperature, wait 2 ½ hours before overcoating
and 4 hours before launching.
|
|
Never Clean or Bottom Paint your Boat Hull AGAIN!!
An Extraordinarily Economical Boat Storage Solution!
Eliminate Virtually ALL Barnacles And Other Marine Organisms From Your Hull Without Bottom Paint OR Cleaning!
Eliminate The Need For A Lift Or Dry Storage!
Improve Performance, Fuel Efficiency And Resale Value
Easy to Use - Low Maintenance - Environmentally Friendly!
Boat Bunkers In-Water Mooring Station protects your boat below the water line by isolating the boat's hull from the surrounding water, which eliminates bottom fouling and keeps your hull clean. Plus, the inflation collar that surrounds the hull of your boat acts as a bumper to protect you boat at the water line.
Fresh water or Salt. Power Boat. House Boat. Sail Boat. 12ft to 50ft. (3.5m to 15m)
|
|
A4 : For fast power boats, sailing, fishing, cruising and racing boats
· Nautix A4 is a high quality hard matrix antifouling selected by many yards since many years. Easy to apply, Nautix A4 will give you a nice hull even in heavy fouling area..
· Hard-matrix, copper-based
· 12,5m2/Ltr per coat
· 2 coats are recommended
· A15°C : wait 3 hours between coats
· 3 hours before lauching
· Recommended primers: Adhesion (only) Nautix P1 - Abrasion protection: Nautix PE or HPE - Osmosis prevention: Nautix PO - Anticorrosion: Nautix PA - Wood: Nautix P1.
· Packing: 0,75 L - 2,5 L - 20 L
|
|
A2 : antifouling for aluminium sailing boats
· 100% metal-free antifouling. This product is efficient against grass and sea weeds but can have a limited effect against bernacles in case of development in the marina.
· 8,5m2/Ltr per coat
· 2 coats are recommended
· A15°C : wait 3 hours between coats
· 3 hours before lauching
· 7 to 8 month efficiency
· Recommended primers: Adhesion Epoxy: Nautix PE or HPE - Anticorrosion: Nautix PA
· 0,75 L - 2,5 L - 20 L
|
|
A1 : Antifouling for aluminium hull perfectly protected by an efficient isolation paint.
· A1 contains an optimum level of derivated copper thiocyanate for the best efficiency. Low corrosion risk except in case of bad aluminium protection.
· A1 must be applied over the appropriated aluminium protection primer. Control regularly the protection
· Recommended primers: Nautix Acralu (1 coat) + Nautix PA (5 coats) or Nautix Acralu (1 coat) Nautix epoxy PEor HPE (5 coats).
· 12m2/Ltr per coat
· 2 coats of A1 are recommended
· A15°C : wait 3 hours between coats
· 3 hours before lauching
· Packing: 0,75 L - 2,5 L - 20 L
|
|
Propshield is a marine product for the private and commercial boat owner alike. It is a lanolin based antifouling grease and can be used to prevent and limit both barnacles, electrolysis and oxidisation. Please note Propshield is no substitute for a good bonding system, the product will work in conjunction with your anodes to eradicate electrolysis. It is compatible with all types of stern gear and various materials from bronze propellers to painted surfaces found on outboard legs.
Propshield is a consumable product and needs to applied once a season or if your vessel is in the water all year round twice a year.
|
|
A7 TSPEED: antifouling for propellers and Z-Drive.
· Hard-matrix antifouling specialy designed for propellers and z-drive.
· 12m2/Ltr per coat (can) et 2m²/spray per coat.
· 3 to 5 coats are recommended on propeller
· A15°C : wait 3 hours between coats
· 3 hours before launching (can) /15mn between 2 coats 2 hours before launching (spray)
· Recommended primers: Acralu+PA or P7
· Packing: 500 ml spray/Can : 0,35 L - 0,75 L - 2,5 L
|
|
For fast power boats and racing boats
· Nautix A4Tspeed is the world reference for racing antifouling, selected by the best skippers all around the world: Ellen Macarthur (Team BT) - Michel Desjoyeaux (Mono 60' Foncia) - Armel Le Cleac'h (Mono 60 Brit Air) - Thomas Coville (Maxi Trimaran Sodebo) - Roland Jourdain (Mono 60' Sill-Veolia), many VOR 70' challengers, most of the Figaro Beneteau and Mini Transat fleets....
· Nautix A4Tspeed ultra smooth and low friction surface associated with high antifouling qualities will make perfect and clean hull
· Hard-matrix, copper-based
· 12,5m2/Ltr per coat
· 2 coats are recommended
· At 15°C : wait 3 hours between coats
· 3 hours before lauching
· Recommended primers: adhesion Nautix P1 - abrasion protection: Nautix PE or HPE - osmosis prevention: Nautix PO - anticorrosion: Nautix PA or P1 - Wood: Nautix P1.
· Packing: 0,75 L - 2,5 L - 20 L
|
|
This special, heavy duty, detergent proof formulation provides a very high gloss, almost indestructible protective coating for personal watercraft and jet boats. It insulates the surface against the adhesion of foreign elements and assures full protection against deterioration, sun rain, salt spray and exhaust stains. Increases speed and reduces fuel costs.
|
|
A3 : Antifouling for yachting, fishing, cruising, and racing boats (under 30 knots speed)
· Nautix A3 is a high quality selfpolishing antifouling selected by many yards and charter companies. Easy to apply, Nautix A3 minimize the paint build up after each season.
· 8,5m2/Ltr per coat
· 2 coats are recommended
· At 15°C : wait 3 hours between coats
· 3 hours before lauching
· Recommended primers: Adhesion Nautix P1 - Abrasion protection: Nautix PE or HPE - Osmosis prevention Nautix PO - Anticorrosion: Nautix PA or P1
· Packing: 0,75 L - 2,5 L - 20 L
|
|
|
Coppercoat is the combination of a specially developed solvent-free epoxy resin and high purity (99%) copper. Each litre of resin is impregnated with 2 kilos of ultra fine spherical copper powder, the maximum allowed by law, making Coppercoat the strongest copper based anti-fouling available. Indeed no other anti-fouling exposes as much active copper to unwanted marine life as Coppercoat.
|
|
A4 : For fast power boats, sailing, fishing, cruising and racing boats
· Nautix A4 is a high quality hard matrix antifouling selected by many yards since many years. Easy to apply, Nautix A4 will give you a nice hull even in heavy fouling area..
· Hard-matrix, copper-based
· 12,5m2/Ltr per coat
· 2 coats are recommended
· A15°C : wait 3 hours between coats
· 3 hours before lauching
· Recommended primers: Adhesion (only) Nautix P1 - Abrasion protection: Nautix PE or HPE - Osmosis prevention: Nautix PO - Anticorrosion: Nautix PA - Wood: Nautix P1.
· Packing: 0,75 L - 2,5 L - 20 L
COLOURS : WHITE, BLUE FRANCE, BLACK, RED, GREEN, NAVY BLUE, GREY
|
|
A3 TSPEED : For yachting, fishing, cruising and racing boats (speed <30 knots)
· A3 Tspeed is a high quality self-polishing antifouling formulated with best compounds. Easy to apply, the T.Speed boost its sliding effect.
· 8,5m2/Ltr per coat
· 2 coats are recommended
· At 15°C : wait 3 hours between coats
· 3 hours before lauching
· Recommended primers: Adhesion (only) Nautix P1 - Abrasion protection: Nautix PE or HPE - Osmosis prevention: Nautix PO - Anticorrosion: Nautix PA or P1 - wood: Nautix P1.
· Packing: 0,75 L - 2,5 L - 20 L
|
|
|
Boatsonic is a unique, small, but extremely effective method for the removal and prevention of algal growth on boat hulls. Installation is very simple. All you need to do is fix the Boatsonic on the inside of the boat below the waterline, and algae and other biofouling organisms will be removed ultrasonically. The biggest advantage of the Boatsonic is that annual antifouling becomes unnecessary. The system benefits the environment by eliminating the need for antifouling paints, forever!
|
|
Trilux 33 is a tin-free antifouling specifically formulated with Biolux Technology, to give highly effective antifouling protection in all waters for up to 18 months. It is suitable for use on aluminium craft, outdrives and outboards and any substrate where bright colours or a bright white antifouling is required.
Containing Teflon® , it provides a smooth, hard, slippery surface which deters fouling attachment, & it can be burnished. Additionally, it has a slow polishing rate at high speed preventing polish-though on fast, active craft
|
|
Trilux Prop-O-Drev is a hard antifouling that is specially formulated for use on outdrives, outboard legs, propellers and sterngear.
Aerosol spray is ideal for painting awkward shapes and difficult to reach areas
Quick and easy application saves you time and effort
Suitable for use on aluminium and stainless steel
|
|
|
Hard antifoulings have a resin system with a high proportion of insoluble resin making them hard, stopping the coating erode. The resin is packed with active ingredients, each particle being in direct contact with its neighbour, as a particle is dissolved by the water the particle immediately behind it is exposed. Because of their hard nature and durability, they are ideal for high speed power boats, vessels which are mud berthed and racing yachts where a smooth finish can be achieved by burnishing the antifouling with wet abrasive paper before the boat is launched.
|
|
Product Description
VC®17m Extra unique thin film technology self-levels to create a super smooth surface without the need to sand and its quick drying nature allows fast over coating and re-launch times
Available in graphite, bright white and fluorescent orange (for safety markings)
VC®17m Extra graphite is not suitable for use on aluminium alloys and zinc sprayed surfaces
|
|
|
This is our simplest and most popular bottom coat system yet. Just two products - Hull-Gard Eepoxy Primer and Awlstar Gold Label - are required to deliver anti-fouling, multi-season protection to fiberglass, wood and steel surfaces.
|
|
The ultimate performer in eroding antifoulings. Includes revolutionary activator and new resin system for unparalleled effectiveness over a full season. Solvent free for easier clean-up.
Contains Copper Oxide and Zinc Pyrithione
|
|
Formulated with Biolux® Technology for controlled optimised biocide release. Micron® Extra does not contain organotin biocides and complies with the IMO Antifoulings Systems Convention (AFS/CONF/26) – Lloyds Register certificate number MNDE/2002/1216
Contains Copper Oxide and Dichlofluanid
|
|
|
|
