|
|
|
|
|
|
|
While not a breaking off innovation, this new generation of fouling release in aqueous phase treatment is one of the top last antifouling paintings.
It can be used on all sea boats or river boats.
Its main benefit is its innocuousness. It is a biocide-free and toxic solvent-free, therefore not hazardous for the aquatic environment and the human health.
The objective is to repel sea life without killing it.
«Seawax Fouling Release® » is mostly recommended for using on boat hulls : weight and water resistance, hydrodynamic trail are therefore reduced. Full consumption is also reduced and the hull requires less cleaning.
Its ingredients prevent and/or delay the fixation of microorganisms such as algaes, shells or shellfish and/or make it very unstable.
It brings its contribution to the preservation of sea life.
Also, there is a « self cleaning » effect when the boat sails, a water pressure is applied to the hull, all organisms then come off the substrate.
«Seawax Fouling Release® » is an alternative solution compared to actual paints, also innovative with obvious benefits for applicators.
Its technical features offer very easy to apply conditions and short drying time.
|
|
UltraGlozz® is a sensational polish for boats, rvs, cars, mc´s and many other areas around your home that need to be treated for easier cleaning and maintenance. UltraGlozz® keeps the surface clean, Nothing sticks to a surface treated with UltraGlozz® - not even black streaks on your freeboard. All you need to keep the surface clean is a bucket of water with detergent and a brush.
UltraGlozz® cleans (without abrasives) without making swirl marks, polishes and seals for up to 18 months.
Use UltraGlozz® on glossy plastic, gelcoat, chrome, aluminium, brass, copper, silver, glass, mirrors and painted surfaces. UltraGlozz® even makes stainless maintenance free without fingermarks.Try to polish your worn plexiglas windows - now they look brand new. UltraGlozz® is easy to use and leaves absolutely no hard to remove residues on hard to reach surfaces
|
|
|
|
|
|
|
Coppercoat is based on a water miscible epoxy resin, which is
heavily loaded with pure grade (99%) fine copper powder and a mix of biocides. When fully cured, this hard wearing epoxy treatment, which contains no banned compounds and is fully certified by the Health and Safety Executive (No. 7532), forms a durable coating that offers
exceptional long term resistance to marine fouling.
When correctly applied, this long life epoxy treatment should continue to deter marine fouling for many years, the annual chore of repainting associated with conventional antifoulings, is no longer necessary.
Damaged areas can be touched up as required. If, over the
months, a slight accumulation of slime does appear, this can be removed by pressure washing or brushing.
An annual wash or brush is recommended.
Eventually, after several years, the surface may need to be lightly abraded with a fine grade of "wet and dry" paper to expose fresh copper.
For more information have a look at www.coppercoat.com or ask for our specifications and prices.
|
|
|
|
|
|
|
Classic Antifouling
• Self-polishing, for sail and pow er boats (< 40 k nots), except aluminium hulls.
• Moderate fouling areas.
• Suitable for drying berths.
• Good compatibility.
• Coverage ratio : 10 m 2 /litre.
• Minimum temperature during application : + 5°C.
In 20°C ambient temperature, w ait 2 ½ hours before overcoating
and 4 hours before launching.
Performance antifouling
• High performance, with gradual polishing ratio, for sail and power boats (< 40 knots), except aluminium hulls.
• High fouling areas.
• Suitable for drying berths.
• Good compatibility.
• Coverage ratio : 8.80 m2/litre.
• Minimum temperature during application : + 5°C.
In 20°C ambient temperature, wait 2 ½ hours before overcoating
and 4 hours before launching.
Racing antifouling
• Ultimate performance self-polishing antifouling, ideal for serious racers and fast powercruisers (< 70 knots), except aluminium hulls.
• Very high fouling areas.
• Very bright colours.
• Sandable, suitable for drying berths.
• Good compatibility.
• Coverage ratio : 11.20 m2/litre.
• Minimum temperature during application : + 5°C.
In 20°C ambient temperature, wait 2 ½ hours before overcoating
and 4 hours before launching.
|
|
MARIN: Antifouing for fishing and cruising boats
|
|
Nautix A1
High quality antifouling for aluminium hull
|
|
A2 : antifouling for aluminium sailing boats
|
|
Propshield is a marine product for the private and commercial boat owner alike. It is a lanolin based antifouling grease and can be used to prevent and limit both barnacles, electrolysis and oxidisation. Please note Propshield is no substitute for a good bonding system, the product will work in conjunction with your anodes to eradicate electrolysis. It is compatible with all types of stern gear and various materials from bronze propellers to painted surfaces found on outboard legs.
Propshield is a consumable product and needs to applied once a season or if your vessel is in the water all year round twice a year.
|
|
|
Commercial Propeller Antifouling Grease. Protects up to 18 months, highly effective at preventing hard growth, oxidisation and electrolysis. Suitable for small workboats, superyachts etc up to large supertankers.
|
|
|
An insoluble matrix specific for protecting propellers, steel shafts and aluminium outdrives from marine fouling
|
|
Nautix A7 TSPEED:
antifouling for propellers and Z-Drive.
|
|
For fast power boats and racing boats
|
|
Nautix A3 :
High quality selfpolishing antifouling
for yacht and motor boats (under 30 knots speed)
|
|
|
Highly effective, long life antifouling, free from organostannic toxins, with a high content of a special copper salt. Thanks to its special formula, it protects wood, steel and fibreglass hulls for many seasons.
|
|
Hard matrix antifouling for fast power boats, sailing boats or leisure fishing boats
|
|
Nautix A3 TSPEED:
Self polishing antifouling for yacht, cruising and racing boats (speed <30 knots)
|
|
|
Trilux 33 is a tin-free antifouling specifically formulated with Biolux Technology, to give highly effective antifouling protection in all waters for up to 18 months. It is suitable for use on aluminium craft, outdrives and outboards and any substrate where bright colours or a bright white antifouling is required.
|
|
Trilux Prop-O-Drev is a hard antifouling that is specially formulated for use on outdrives, outboard legs, propellers and sterngear.
- Aerosol spray is ideal for painting awkward shapes and difficult to reach areas
- Quick and easy application saves you time and effort
- Suitable for use on aluminium and stainless steel
|
|
Product Description
VC®17m Extra unique thin film technology self-levels to create a super smooth surface without the need to sand and its quick drying nature allows fast over coating and re-launch times
Available in graphite, bright white and fluorescent orange (for safety markings)
VC®17m Extra graphite is not suitable for use on aluminium alloys and zinc sprayed surfaces
|
|
|
Awlstar Gold Label is a self polishing antifouling used to deter fouling growth, ensuring the ultimate underwater protection for both power and sailing yachts.
|
|
Formulated with Biolux® Technology for controlled optimised biocide release. Micron® Extra does not contain organotin biocides and complies with the IMO Antifoulings Systems Convention (AFS/CONF/26) – Lloyds Register certificate number MNDE/2002/1216
Contains Copper Oxide and Dichlofluanid
|
|
The ultimate performer in eroding antifoulings. Includes revolutionary activator and new resin system for unparalleled effectiveness over a full season. Solvent free for easier clean-up.
Contains Copper Oxide and Zinc Pyrithione
|
|
No longer just extra strong, a new, improved formula makes this superior antifouling ultra strong. It is ideal for high-speed crafts or craft on drying moorings. Can be burnished. Contains Biolux which is exclusively available in antifoulings from International.
Contains Copper Oxide and Preventol A4S
|
|
OVERVIEW:
Rust-Oleum Marine Coatings Boat Bottom Antifouling Paint releases copper to prevent the buildup of barnacles, algae and other marine growth. Apply to fiberglass, wood or steel surfaces below the waterline. Works in fresh or salt water.
PRODUCT FEATURES:
- Protective coating for use below the waterline
- For mild to moderate fouling conditions in both fresh and saltwater
|
|
Ideal for boat owners who want to get the job done quickly, Cruiser® Uno is compatible with most antifouling schemes, and allows you to paint and immerse within one day.
Designed for both motor boats (up to 25 knots) and sailing boats.Contains
Copper Oxide and Preventol A4S
|
|
|
Boatsonic is a unique, small, but extremely effective method for the removal and prevention of algal growth on boat hulls. Installation is very simple. All you need to do is fix the Boatsonic on the inside of the boat below the waterline, and algae and other biofouling organisms will be removed ultrasonically. The biggest advantage of the Boatsonic is that annual antifouling becomes unnecessary. The system benefits the environment by eliminating the need for antifouling paints, forever!
|
|
| ... products without information |
| |
 see the results for the following category : Primers |
|
|
