Products > Material and paint > anti-corrosion coating

Anti-corrosion coatings

7 Products (boat or nautical equipment) | 5 Companies

Protective coating : anti-corrosion (for merchant ships and professional boats) JOTAMASTIC SMART JOTUN

Ideal for brush and roller application
Jotamastic Smart Pack has the same exceptional ...

Protective coating : anti-corrosion (for merchant ships and professional boats) AQUACOVER™ 25 Sigma Coatings PPG PMC

Water-borne acrylic zinc phosphate primer
Particularly suitable when solvents ...

Protective coating : anti-corrosion (for merchant ships and professional boats) AQUACOVER™ 45 Sigma Coatings PPG PMC

Water-borne acrylic glossy finish
Particularly suitable ...

Protective coating : anti-corrosion (for merchant ships and professional boats) VIKOTE™ 46 Sigma Coatings PPG PMC

High-build modified acrylic coating
Typical Use: Build coat for ...

Elastomer protective coating : anti-corrosion (for merchant ships and professional boats) SERIE 700 Metaline

MetaLine Series 700 coatings uniquely combine protection offered by elastomeric barriers and electro-chemical protection ...

Anti-corrosion epoxy/polyamid dual-component coating (for merchant ships and professional boats) N10V350 | MIL-24441 TYPE III Sherwin-Williams

Mil-24441, Type III is a VOC compliant epoxy polyamide system, formulated for immersion service and to protect surfaces from environmental attack. For use where air pollution ...

Anti-corrosion finishing coating (for merchant ships and professional boats) PU COMBINATION 100 (100-125-150µm, 7-5.6-4.7m²/L) Steelpaint

Type:
1-Component Moisture Cure Polyurethane (MCPU) Coating
Basic properties:
Designed as an intermediate or top coat for different, highly sophisticated coating systems. Extreme adhesion and durability under extreme atmospheric and climatic conditions, can for example be used in the seawater tidal ...

Related searches

Ship coating
Coating
Elastomer coating
Epoxy coating

Catalog search

Troton sp. zo.o.
Sea-Line Catalouge EN/PL 2010

Here the first 5 pages from the catalogue "Sea-Line Catalouge EN/PL 2010", returning results for: anti corrosion coating

P. 13
varnish recommended for priming wood surfaces. Excellent under epoxy ground coats and polyurethane enamels. Creates a durable elastic coating. Anti-corrosive epoxy primer Especially recommended for priming steel surfaces above and below the water line. Ensures excellent protection against corrosion

P. 4
?æ mieszania / easy to mix ? odporno?æ na warunki atmosferyczne / resistant to atmospheric conditions nie ch³onie wody repels water w³a?ciwo?ci antykorozyjne anti-corrosive properties 4 stal steel aluminium drewno wood laminaty poliestrowe i epoksydowe polyester GRP epoxy GRP polecana poni

P. 12
dobrze siê miesza easy to mix w³a?ciwo?ci antyosmotyczne anti-osmotic properties w³a?ciwo?ci antykorozyjne anticorrosive properties 12 Sea - Line® ride the wave PODKADY EPOKSYDOWE ? Bardzo dobra rozlewno?æ daj¹ca doskona³e wykoñczenie ? Du¿a ³atwo?æ mieszania sk³adników i aplikacji podk

P. 8
your water craft. Because of their anti-osmotic properties, and their ability to keep water out, epoxy fi llers are the only ones recommended for elements of the hull below the water line. ? bardzo dobra przyczepno?æ / excellent adhesion ? znikomy skurcz / no contraction or shrinkage ? twardo

P. 11
specjalistyczna szpachlówk¹ przeznaczon¹ do modeli i form szkutniczych. Universal polyester fi ller for small and medium repairs. Package contains: 300 g Polyester fi ller reinforced with fi breglass. Recommended for large repairs, rust damage, and reinforcing weakened structural elements. Package
Seawax Marine Coatings SAS
SEAWAX® Fouling Release

Here the first 3 pages from the catalogue "SEAWAX® Fouling Release", returning results for: anti corrosion coating

P. 1
. Note: although it can be applied on iron and steel ship bodies, this coating has no anti-corrosion properties. On these substrates, first apply a layer of anti-corrosion paint. ____________________________________________________________________________________________________ APPLICATIONS

P. 2
PREPARING THE SUBSTRATE: SECOND TREATMENT Wash with low pressure cold water (50/60 bars) or using a sponge. Then give back some grip to the antifouling SEAWAX® Fouling Release, using the cleaner SEAWAX® Cleaner. Rinse with fresh water and dry carefully before applying the coating

P. 3
.umin~nreiiiiiings.com. SEAWAX MARINE COATINGS' policy is lo keeping on improving their products. All our products are subjected to mudifi< minus Killioat prior notice. The brand SEAWAX® and the semi-figurative brand « SEAWAX MARINE COATINGS Let's protect sea life >> are registered trademarks of tile SAS
Teal & Mackrill
METACLOR DATA

Here the first 2 pages from the catalogue "METACLOR DATA", returning results for: anti corrosion coating

P. 2
after recommended preparation. SUBSEQUENT COAT: Teamac Antifouling paints or part of a specified Teamac anti-corrosive system. For further advice contact Teamac Technical Services on +44(0)1482 320194 The physical constants are subject to normal manufacturing tolerances. "COVERING OUR CUSTOMERS' NEEDS SINCE 1908

P. 1
as an underwater primer on prepared steel or as a sealer coat over most conventional systems. AVAILABILITY: °C (closed cup) DRYING TIME: @ RECOMMENDED D.F.T Touch dry: 30 mins @ 20 °C Hard dry: 6 hours @ 20 °C Full hardness: N/A Low temperature and high humidity will adversely affect application
Seawax Marine Coatings SAS
SEAWAX® Etch Primer

Here the first 2 pages from the catalogue "SEAWAX® Etch Primer", returning results for: anti corrosion coating

P. 1
primer. On polyester hull: apply an osmosis treatment. On iron hull: apply an anti corrosion treatment. Substrate with an existing anti-fouling coating: rinse with high pressure freshwater, degrease and remove dust and let dry prior to applying the coating. Substrate in poor condition: clean off

P. 2
%. _______________________________________________________________________________________________________ DRYING TIME (standard conditions: 23°C / 50% RH) TEMPERATURES 10°C 15°C 23°C 30°C Dry to the touch Over lap coating time (mini) 1H00 3H00 40min 2H00 20min 1H00 10min 45min Over lap coating time (maxi) 5H00 4H00 3H00 2H00 Note: In case these times are surpassed, sand
Teal & Mackrill
ZINC RICH DATA TM

Here the first 2 pages from the catalogue "ZINC RICH DATA TM", returning results for: anti corrosion coating

P. 2
of the product please contact our Technical Service Department on 01482 320194. Apply direct to prepared iron and steel. SUBSEQUENT COAT: Suitable Teamac topcoat paints or Teamac Zinc Phosphate Primer as part of a specified Teamac anti-corrosive system. REMARKS: Must be applied in direct contact with the iron

P. 1
(closed cup) DRYING TIME: @ RECOMMENDED D.F.T Touch dry: 30 mins @ 20 °C Hard dry: 8 hours @ 20 °C Full hardness: N/A RECOMMENDED USE: Teamac Zinc Rich Primer is for use on iron and steel as protection against corrosion. The coating must be in direct contact with the iron or steel to work