|
|
Sleek and classy, the designer look of this four-way ratchet mount won't fail to catch your eye. Its simple lines come from a nutless design. This streamlined beauty has standard 1"-14 threads and a special cable slot that eliminates removal of most factory installed connectors. Easy on the eye, and super easy to use.
* Stainless steel construction
* Standard 1in-14 thread (male)
* Slot for cable feed-through
* Bolt holes: 5/16" dia,, 3" x 1½" on center
|
|
- Comes with standard 1"-14 threads.
- No drilling necessary. Mounts easily to the t-top frame.
- Super strong polished and anodized aluminum.
- Stainless Hardware.
- GUARANTEED AWESOME! - Love it or Return it.
|
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas
|
|
Space on board is always limited for installing satcom/tv antennas. Scanstrut Mounts eliminate this problem by reducing the mounting footprint size by up to 60%, providing greater choice of antenna position and a quick and easy installation.
These high quality installations guarantee maximum performance from your satcom antenna.
|
|
Based on a unique ellipse extrusion, our new Satcom/tv PowerTower® is designed to raise your satcom antenna clear of obstructions, whilst minimising the footprint, allowing greater choice of antenna position.
> Options for all 30cm, 40cm and 60cm satcom/tv antennas.
> Hollow stem - cables routed neatly inside
> Antenna fastens to PowerTower® using antenna mounting
|
|
These mounts are ideal for Instrumentation, Computers or Hi-Fi systems
These mounts also have been used successfully under small water pumps and portable gensets.
All mounts have the option of stainless steel components, which are ideal for salt water pumps, desalinaters, air conditioning units, etc, etc.
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
| ... products without information |
| |
NSD-10 R or L, NSDX-10 R or L FOR DOWNWARD-OPENING FLAP
NSD-20 R or L, NSDX-20 R or L FOR TOP-OPENING FLAP
NSD-35 R or L, NSDX-35 R or L FOR UPWARD-OPENING FLAP
*Keeps flap/lid from slamming down or flying open.
*Recognized by LGA for 50,000 cycles.
*Opening/Closing speed adjustable.
*Opening angle is adjustable by changing mounting position.
*Handed-Choose Right and Left versions for your application.
*Calculate the appropriate torque for your application.
(See our websites for more information.)
http://www.sugatsune.co.jp (Sugatsune Japan)
http://www.sugatsune.com (Sugatsune America)
http://www.sugatsune.net (Sugatsune America, Industrial)
**Sugatsune UK website under construction.
E-mail: export@sugatsune.co.jp
|
|
EB-303/EP
FOLDING BRACKET
Material: 304 Stainless Steel
Finish: Electro Polished
(Screws not included.)
Load Capacity: 150 kg (330 lbs)
Length: 305.5mm, Width: 20-29 mm, Height: 165 mm
Visit our websites for other brackets.
http://www.sugatsune.co.jp (Japan)
http://www.sugatsune.com (USA)
http://www.sugatsune.net (USA, Industrial)
|
|
| ... products without information |
| |
|
|
see the results for the following category
