|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
Based on a unique ellipse extrusion, our new Satcom/tv PowerTower® is designed to raise your satcom antenna clear of obstructions, whilst minimising the footprint, allowing greater choice of antenna position.
> Options for all 30cm, 40cm and 60cm satcom/tv antennas.
> Hollow stem - cables routed neatly inside
> Antenna fastens to PowerTower® using antenna mounting
|
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas
|
|
Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.
Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.
NEW mounting foot design for 2008 - even easier installation.
Features
- Easy and quick to install with all fastenings supplied
- Attached to mast by four swivel feet matching the profile of any mast
- 12 point fixing using highest quality Monel rivets for a secure installation
- Nylon washers for all fastenings to protect paint finish
- Waterproof cable grommet included to seal cable entry into mast
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
Space on board is always limited for installing satcom/tv antennas. Scanstrut Mounts eliminate this problem by reducing the mounting footprint size by up to 60%, providing greater choice of antenna position and a quick and easy installation.
These high quality installations guarantee maximum performance from your satcom antenna.
|
|
Based on a lifetime experience in maritime communication products for the GMDSS requirements, Thrane & Thrane now presents a GMDSS solution made from the 4th generation Inmarsat-C platform: The new SAILOR TT-3026C mini-C GMDSS transceiver.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Available in a forward leaning profile for radome installations and an aft leaning profile for open-array installations.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
Offering a single "monocoque" structure for outstanding strength and surface finish, Scanstrut's Composite PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Its aerodynamic shape and high gloss finish makes a product that is as strong as it is attractive.
NEW design for 350mm version - even greater strength to suit all new generation radomes.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks.
|
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas
|
|
Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.
Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.
NEW mounting foot design for 2008 - even easier installation.
Features
- Easy and quick to install with all fastenings supplied
- Attached to mast by four swivel feet matching the profile of any mast
- 12 point fixing using highest quality Monel rivets for a secure installation
- Nylon washers for all fastenings to protect paint finish
- Waterproof cable grommet included to seal cable entry into mast
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
Scanstrut's Stainless PowerTower® is designed to elevate your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has a clear view of the horizon and maximum performance can be achieved.
Created using a highly polished stainless steel, this makes a great looking installation on any boat.
Features
- Hollow stem to route cables neatly inside mount
- Pre-fitted waterproof IP65 gland to seal cable entry into stem
- Pre-drilled mounting holes for quick and easy installation
- Antenna fastens to PowerTower top plate using own mounting bolts
|
|
|
|
