|
|
Sleek and classy, the designer look of this four-way ratchet mount won't fail to catch your eye. Its simple lines come from a nutless design. This streamlined beauty has standard 1"-14 threads and a special cable slot that eliminates removal of most factory installed connectors. Easy on the eye, and super easy to use.
* Stainless steel construction
* Standard 1in-14 thread (male)
* Slot for cable feed-through
* Bolt holes: 5/16" dia,, 3" x 1½" on center |
|
- Comes with standard 1"-14 threads.
- No drilling necessary. Mounts easily to the t-top frame.
- Super strong polished and anodized aluminum.
- Stainless Hardware.
- GUARANTEED AWESOME! - Love it or Return it. |
|
Scanstrut's Dual PowerTower® mounts allow the installation of radar and satcom antennas together on a single space-saving mount. Installing the satcom antenna above the radar eliminates antenna interference and ensures maximum performance from both applications.
The range includes options to mount:
- 2kW or 4kW radomes + 40cm or 60cm satcom antennas
- 4' open-array 40cm or 60cm satcom antennas |
|
Based on a unique ellipse extrusion, our new Satcom/tv PowerTower® is designed to raise your satcom antenna clear of obstructions, whilst minimising the footprint, allowing greater choice of antenna position.
> Options for all 30cm, 40cm and 60cm satcom/tv antennas.
> Hollow stem - cables routed neatly inside
> Antenna fastens to PowerTower® using antenna mounting |
|
Space on board is always limited for installing satcom/tv antennas. Scanstrut Mounts eliminate this problem by reducing the mounting footprint size by up to 60%, providing greater choice of antenna position and a quick and easy installation.
These high quality installations guarantee maximum performance from your satcom antenna. |
|
These mounts are ideal for Instrumentation, Computers or Hi-Fi systems
These mounts also have been used successfully under small water pumps and portable gensets.
All mounts have the option of stainless steel components, which are ideal for salt water pumps, desalinaters, air conditioning units, etc, etc.
|
|
Contact PYI for your custom electronic mounting solutions. We make specialty products for a wide range of customers from individual boat owners to production boat builders, we can design and build a mount for you. Our fabrication shop can build a wide variety of styles to meet your requirements. We have aluminum airfoil and round extrusion that we can use to design the perfect mount for your application. Examples of some of these solutions are shown in the pictures above. Lead time on customs orders is generally 3-4 weeks. Please fill out the form below to start the process.
|
|
| Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5. |
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck |
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck |
|
| ... products without information |
| |
Heavy-duty polyethylene pipe bracket allows docks to adjust to changing water levels.
Part #: 210250, 210350 |
|
| Special connection couplers are designed to allow sections to move independently under high-stress conditions, yet provide unified stability. Made with recycled material, the couplers are compounded to prevent fatigue problems. The composite coupler bolt and nut eliminate rusting in all water conditions |
|
MOORING SYSTEMS - SPACING RODS
The system is designed and manufactured for the mooring of individual floating modules or jetties, when they have to be installed alongside the shore or the quay.
The device is made of pipes equipped with joint knees at both ends, for the fixation respectively to the quay and to the module.
Wind-braces, made of chains and eye-tensors fixed to the ends of the rods, prevent the floating module from horizontal movements.
All the steel components are hot dip galvanised; stainless steel screws and nuts.
Gangway with handrails normally provides the access to the jetty.
|
|
MOORING SYSTEMS - “UP AND DOWN” SELF-BEARING SLIDING DEVICE
The system is designed and manufactured for the installation of floating modules or jetties in places where both high water level variation occurs and the jetties are required to be installed alongside next to the quay.
The device is made of a corbel shaped electro-welded hot dip galvanised steel frame, equipped with polyamide rollers to ensure easy movement along a guide rail vertically fixed to the quay.
Floating modules are fixed on the sliding frame, thus allowing large upwards and downwards movements of the pontoon according to the water level variation.
Screws and nuts are made of stainless steel.
|
|
| ... products without information |
| |
|
|
see the results for the following category
