|
|
SPADE anchors are manufactured in 3 materials (Steel, Aluminium, Stainless Steel), and in 6 sizes.
Plough shaped anchors are designed to plough sea floors. SPADE anchors by name, and by action, dig deeply into the sea floor. Once they are within the sea floor, the concave shape of SPADE anchors compact the sea floor, and thus not to move! This design is unique.
The remarkable efficiency of a SPADE anchor is due to the size, and shape, of its effective surface : SPADE anchors of the same surface area will have the same holding power, no matter the material they are made of. All models meet the seven safety criteria :
1. The anchor digs in rapidly, regardless of the type of sea bottom.
2. The anchor buries itself deeply within the bottom.
3. Once set, the anchor gives the maximum holding power without dragging.
4. If the traction force exceeds the bottom holding characteristics, the anchor offers constant, and maximum, resistance to dragging - even if it moves under extreme load.
5. The anchor keeps on holding, regardless of the shift in direction of either the wind or the current.
6. The anchor design doesn't allow the anchor rode to become snagged by the anchor.
7. The anchor is built strongly enough to withstand very high loads.
|
|
... see all the products in the category
Anchors
|
Savage Marine was the first company in the world to produce linear illumination fibre optic nameboards and logos, and in the last 4 years have supplied names to over 100 major yachts.
Utilising our knowledge and expertise we have manufactured fully illuminated Mirror Polished Stainless Steel letters from as little as 47mm in height weighing only 85gms to a seven letter yacht name , 8 metres in length, with a total weight for Port and Starboard letters of 1272kgs! (or as we like to say 'No job too big - No job too small') |
|
A new generation:
Illuminated lettering
Your yacht - a dream on the ocean's waves. Her name - meaningful and personal, mirrors you, your desires and your dreams.
The name of your yacht is symbolic and should radiantly shine and glow even at night |
|
| Yachtlite's newest exclusive product - your yacht lettering with a high-quality saltwater-proof porcelain cover adding an extra touch of elegance and exclusiveness. |
|
| Yachtlite can handle all characters such as Japanese, Arabic, Cyrillic, and any special characters or logos and emblems. Various materials and colours optionally amplify the diversity. |
|
| Highlight the name of your yacht in more than one colour with Yachtlite's RGB network regulated colour-change process. Connection to an existing DMX regulator can be arranged. Naturally, the colour change can be held at your desired colour. |
|
| ... products without information |
| |
|
... see all the products in the category
Lettering
|
The GlasCraft Spartan II is the latest technology available from GlasCraft that is specifically designed for low-pressure injection of polyester and vinyl ester resin in Resin Transfer Molding (RTM and RTM Lite) Injection Applications. The Spartan II family comes in a variety of configurations that can be used in manual or automatic injection, depending on your needs.
The Spartan II is available in the following configurations:
Spartan II
Spartan II Deluxe
Spartan II PLC
Spartan II PLC with PAC
Spartan II PLC with PAC & RFID |
|
Spartan II PLC - designed for automated RTM Lite with touch screen programmable interface
GlasCraft's Spartan II PLC proportioner provides all the functionality of the Spartan II Deluxe, and adds the following performance-enhancing features for increased efficiency:
Touch screen programmable interface
30 programmable injection settings
Programmable digital gel timer
Programmable digital air / solvent flush |
|
RTM Light technology; also known as RTM Eco, has become very popular when it comes to producing small and medium series or a large number of different parts by using a simple, low cost method.
Each industry, and above all each particular need is a unique RTM light project. Matrasur Composites' job is to propose the appropriate equipment for each application, including industrialisation solutions when production quantities increase. |
|
The Mariner is a lighted bollard that can stand from 11 inches to 96 inches tall and can be used in various applications from marina docks, to landscaped areas, around pools, golf courses, parking lots and beyond. The housing is made of engineered resin to withstand the harsh marine and land environments form Alaska to the tropics. The mariner became available in May 2007 and comes with a lifetime warranty.
Product Specifications:
Can be configured with a 5 Watt, 7 Watt or 13 Watt Fluorescent Bulb
Can be mounted to a 4 inch. PVC Pipe to get the desired height
We can supply the mounting base and painted pole for any desired height
Lifetime Warranty on the engineered resin housing
Patent Pending
UL Listing Pending |
|
Mimic panel X for navigation lights and bilge pump control for motor yacht.
|
|
| ... products without information |
| |
| ... products without information |
| |
- Bag with volume divided in front and in back, a concept that makes it possible to optimize equilibrium in the water.
- Single-bag in 840 denier Nylon/polyurethane connected to the adjustable harness
- Volumes from 14 to 28 liters depending on size
- Fixed rear ballast pockets, 2.5 kg max
- Expandable 5-kg ballast pockets in front with safety closure
- Thermoplastic backpack with lumbar support
- Adjustable transport and waist straps
- Pockets with zip sides and multiple accessory pockets with knife holder
- Inflator standard, plus 2 upper exhaust valves and 1 lower
Sizes : XS - S - M - L - XL |
|
FREE STYLE WITH FLAIR
The Flares are the fast-freestyle boards designed by our riders for our riders. Taty Frans, Kiri Thode, Frank Diaz and Sara Quita Offringa developed the range around the idea of mixing speed and freestyle for an explosive combination. Instant power, pin point control and aerial balance lets you fire up any trick with more speed, more style and more smiles.
What's new?
The Flare 99 and 111 have a new wider, fatter tail design that pops you up on the plane, switching on acceleration and power at will. These new shapes will give you more tolerance and more float for longer slides and faster tail rides. There's also a new constant-curve rocker that boosts aerial pop and improves maneuverability. The trademark heel gutters first introduced back in 2005 continue in 2008, increasing deck-dome to provide impeccable comfort and grip.
The Flare 60, 72 and 88 continue unchanged for 2008 with their slalom rockerline and slalom vee: these are the team's weapon of choice for high wind conditions or lighter riders.
Summary:
Super-fast freestyle boards
Wider and fatter tail shapes in the 99 and 111 model
New constant-curve rocker in the 99 and 111 model |
|
The Hatteras Light and the Lighthouse use the same light assembly, providing a 360 degree light pattern. This light pattern is important in a marina because it lights both the dock and finger piers, yet does not shine in the boats because it's directed downward. Best of all, the bulb will last about 3 years and costs about 30 cents per month to operate.
The Hatteras Light is just 30" tall, and can be equipped with two 20 amp GFI or two 30 or 50 amp marine receptacles or a combination of 20, 30, and 50 amp receptacles. Introduced in 1993 and with thousands in service, this popular unit offers a low cost alternative to the Lighthouse for smaller boat applications. The attractive Hatteras Light will welcome your guest in style. They're great not only for marinas, but also for your dock, pool, lawn and deck area. To guarantee durability, the Hatteras has also been tested by Underwriters Laboratories.
Main Features include:
Photocell controlled 13 watt fluorescent light provides 360 degree lighting
20 amp GFI duplex receptacle and thermal magnetic circuit breaker
30 amp 125v marine twist lock receptacle and thermal magnetic circuit breaker
50 amp 125/250v marine twist lock receptacle and thermal magnetic circuit breaker
Hose bib and adapter/cable brackets
Tough thermoplastic housing with two-part polyurethane paint with UV inhibitor
Rated up to 100 amps with loopfeed copper bus bars
7.5" square mounting base and a maximum diameter of 13.5" around top of pedestal
Easy replacement of breakers, receptacles, meters, and lights
Hinged base and top allow for unit to be pre-wire, saving installation time over units that have separate bases
TV/phone connections with weatherproof cover |
|
THE MOST SUCCESSFUL BOARD OF 2007 HAS BEEN EQUIPPED WITH NEW STRAPS AND PADS AND A NEW BIGGER SISTER BOARD HAS FOLLOWED. THE BS3 LIGHT AND HYPERLIGHT AIR ARE TWO FANTASTIC BOARDS THAT CAN BE USED RIGHT AFTER YOU FIRST STEPS WHEN LEARINING, IN SUPER LIGHT WINDS AND THANKS TO THEIR PROGRESSIVE FLEX AND LENGTH, THEY HAVE BECOME VERY POPULAR IN THE RACING DISCIPLINE! FAST AND EASY WITH AN UNBEATABLE UPWIND
PERFORMANCE! |
|
The Light is the perfect travel kite; light in weight and packs very small due to its compact size and minimalist 3 Strut Concept. Take the 12m on holiday with your surfboard and you have the perfect travel combo that will be under any airlines weight limits! The low end grunt of the Instinct Light is truly impressive and combined with its massive depower, the wind range of the Light allows you to consider a one size quiver for most days.
For wave riding, the Light’s low weight is the secret that unleashes its increased performance from such a stable shape. It literally hangs in the air even in super light winds and at the edge of the wind window…. it just keeps pulling. The lightness is really felt when on fast waves …when moving with a quick wave the rider can easily overtake the kite and create less tension on the lines between rider and kite. While a heavy kite loses power and dies in this situation, the Instinct Light just keeps pulling away from the rider maintaining constant tension & pressure in the lines. This allows the rider to concentrate 100% on the wave knowing that the Light is always ready, and with its progressive steering one can confidently snap turns at will up or down the line. |
|
Sailing fun for all - Everyone will have fun with the new HAPPY CAT LIGHT 3D:
- Fun seeking enthusiasts, who get a kick out of sailing the cat to utmost limits.
- Families with children looking for safe adventure and holidays that dreams are made of.
- Seniors who can, after their long awaited retirement, at last realize what they had always dreamt of.
The new HAPPY CAT LIGHT 3D is another success story with regard to innovative technology.
Hitherto it has been possible to produce round air-tube floats only. Years of research led to the production of three dimensional shaped cone-points.
That considerably enhances speed over unchanged wind conditions, and reduces bow wash from head-on waves. The lightest of breezes suffices to get the cat going.
The HAPPY CAT LIGHT 3D standard inventory already includes everything that elsewhere is sold as expensive extra. |
|
|
