- Maritime equipment >
- Navigation, Communications, Electronics >
- Analog converter
Analog converters
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Voltage: 24 V
The Universal CAN Converter AHD-UCC is a microcontroller-controlled unit for logging and conversion of measuring point data from communication protocols of external CAN-bus networks into Böning AHD-SAS CAN-bus network. Product ...
Böning Automationstechnologie GmbH & Co. KG
Voltage: 24 V
By means of CAN-USB-converter unit AHD-CUC, external PC-systems, whose video sources are connected to Böning 10“ bis 19“ colour displays for visualization, can be controlled by operating elements of Böning display control ...
Böning Automationstechnologie GmbH & Co. KG
Voltage: 24 V
The video signal converter AHD-VSC C is used for connection of standard AHD-VC cameras to video distribution and control unit AHD-VDCU by means of a CAT5 cable. The connection comprises transmission of video signal and ...
Böning Automationstechnologie GmbH & Co. KG
Maretron’s CLM100 converts commercially available 4-20mA current loop transducers into digital data so a wide variety of information can be displayed on compatible NMEA 2000® displays. Numerous 4-20mA current loop transducers are supported ...
Voltage: 12 V
The Link UP Gateway - Resistive interfaces the resistive-type analog sensors with the NMEA 2000® network to make all the information available for any display. Wireless configurable, the Link UP gateway can be easily ...
Veratron AG
Voltage: 12, 24 V
The Link UP - IBS provides an easy method to monitor your battery information to NMEA 2000®. The data are then available for being displayed on any OceanLink, AcquaLink, or more in general on any NMEA 2000® display device. Configuring ...
Veratron AG
Voltage: 12 V
The Link Up Gateway - 2-in-1 provides an easy method to convert engine information to NMEA 2000®. The devise is specifically designed to fit the sensor included in this kit. It measures temperature and pressure and can be applied for ...
Veratron AG
Voltage: 12, 24 V
Multifunction programmable converter provided with several analog input. Can be used to acquire and convert analogue signals from different measure sensors to J1939 or NMEA2000 compatible protocols. Dimensions: ...
San Giorgio S.E.I.N. srl
Voltage: 12, 24 V
Multifunction programmable converter provided with four analog inputs and one CAN Bus communication port. Can be used to acquire and convert analogue signals from different measure sensors to J1939 compatible ...
San Giorgio S.E.I.N. srl
Voltage: 12, 24 V
Single CAN Bus J1939 engine NMEA2000 output converter. Read the main parameters from two ECU engines and convert them into NMEA2000 output to connect last generation plotters and/or integrated navigation systems. Dimensions: ...
San Giorgio S.E.I.N. srl
... 24bit Analog to NMEA Converter to convert voltages & currents to digital signals which is used in the marine industry. Example equipment includes Thrusters, Engine Telegraph, Shaft RPM and other standard ...
... Digital Yacht’s SeaTalk to NMEA 0183 (ISO) converter is a small but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA0183 network or device. The ST-NMEA converter ...
Voltage: 0 V - 10 V
Power: 2 W
Range of transmitters/converters for analog signals in voltages, current, frequency and resistance (useful for measuring levels, temperatures, etc.). Galvanic separation between input, output and power ...
Voltage: 10 V - 36 V
ADPC-101 is designed to digitize the analog signals of the obsolete gyro compasses and logs into NMEA format and transmit that data to the relevant navigation equipment.
Voltage: 12 V
Video Signal Converter Convert analog and digital video signals directly to the desired monitor signal, without any delay or interference. - TVI/AHD/CVI/CVBS (input) to CVBS/VGA/HDMI (output) ...
Voltage: 24 V
The converter consists of 3-phase synchro signals in the NMEA Standard HDT. The inputs with the jumpers can be adjusted to the present signal voltages. The ratio must be 1:1. Main Features dimensions - 134mm x ...
DEIF's rudder/azimuth angle transmitters convert the rudder or azimuth thruster’s position angles into either electrical current signals or digital data values with a 16 bit resolution (+/-180de.g. = +/-32767). Unlike potentiometers, ...
Your suggestions for improvement:
Receive regular updates on this section.
Please refer to our Privacy Policy for details on how NauticExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- AboutVirtualExpo Group
Please specify:
Help us improve:
remaining