|
|
|
|
5.80 m
19' 0"
|
|
|
The PRORAID 580 is designed to be a multiple use boat allowing 10 divers and their equipment. The pilot, confortably seat in his leaning post, will enjoy navigating even if the sea is rough, behind a wide consol with a windscreen. The 200 L autonomy ensure a long trip. The hydraulic steering is designed for the most powerful OBM (150 Hp).
The serial hull and collars reinforcements allow a heavy duty use of this sea "4x4".
The safety fittings and personal items can be stored into both consol boxes and into the large bow anchor box.
The electric control panel, which feeds the bilge pump, is equipped for 5 further optional connections.
Do not forget that the PRORAID 580 has large, well-sized collars in Hypalon/Neoprence fabric (1670 decitex) and many reinforcements, on collars as well as on the hull.
|
|
|
|
6.00 m
19' 8"
|
|
|
A semi-rigid vessel designed and built to sail in extreme sea and weather conditions.
The pneumatic part of the vessel is made in neoprene Hypalon fabric, an elastomer derived from rubber, the strongest fabric used to make professional pneumatic vessels. The fabric is not affected by ultraviolet rays, unlike plastomer-derived fabrics.
neoprene Hypalon fabric is also used as it is more resistant than plastomer fabrics to the action of the sea, which is in constant contact with the pneumatic part of the vessel.
If any accident occurs with Neoprene Hypalon fabric, as it is cold-glued it can be repaired in any place and, following the instructions in the manual, by any person in any emergency situation.
The floats are reinforced in the areas of greatest wear and covered with a non-slip Neoprene surface and protected by two solid Neoprene perimeter fenders.
The layout of the floats, conical in the bow, opening towards the stern to offer greater wind resistance and prevent the bow from rising excessively due to sharp winds and gusts from the stern.
In the construction, the criterion of high-strength with very low weight was what led us to select materials with good strenght and module characteristics. The vessel is thus built with fibreglass-reinforced polyester in a sandwich construction, reinforced on the inside and joined to the deck.
There is also a vessel with a hull built entirely of Kevlar and carbon fibres, and glass to a lesser extent, using specialsynthetic cores to withstand the severe pressure conditions of 20 atmospheres and the forces of the engine, thus forming and indestructible assembly. The sequence and layout of the layers consider the strength of the piece to whihstand water impacts at 40 knots, at the same time offering the assembly incredible resilience to dampen instant charges.
These vessels have been designed above all to perform tactical operations in coastal waters, disembarking and beaching, and are suitable for transport by air on a standard platform and launched by parachutewith a water impact speed of 8 m/s, and for stowing on the deck in submergibles of maximum depths of 200 m.
|
|
|
|
6.59 m
21' 7"
|
|
|
|
The Osprey Sea Harrier with its unique high performance V hull design and Ospreys Fibreglass bow, will give the user astounding speed with moderate inboard and outboard configurations.
|
|
|
|
7.00 m
23' 0"
|
|
|
Interception and Security
Zodiac is a major partner to Customs, Law, Fire, Rescue and Enforcement agencies as these end users have recently seen their responsibilities grow to include more marine response, intervention and protection. Some of our craft have become more paramilitary, stealthier, and ready for hostage recovery.
Special products and features have been developed to help officers do their jobs better like extra rub strake protection, ballistic protection, non-collapsible foam collars, boarding aides and dive doors. From large RIBs (shown top right) to smaller craft like the MK III GR , we have the boat you need.
|
|
|
|
7.19 m
23' 7"
|
|
|
Alongside the Adventure range, Avon offer you Adventure Open model, with the same hulls but with the opportunity to customise your boat to your own particular requirements. Now you can choose exactly the on deck layout that suits you best, whatever your needs. Discuss with your Dealer the best for you and choose from our range of recommended fittings.
|
|
|
|
7.20 m
23' 7"
|
|
|
|
AsC 7.2 RIB. The design of the hull provides a very dry boat - the spray from the concave chimes is thrown out at a low angle, keeping the crew dry in almost any conditions. It features a deep 'V', reinforced hull, high quality Hypalon tube, and reinforced deck.
|
|
|
|
7.50 m
24' 7"
|
|
|
One of the Rayglass range of Protector boats biggest sellers. Easily transportable on the open roads yet big enough to handle the extra personnel on the sea.
With the extra metre in length and slightly wider beam than the 6.5m, the 7.5m centre console accommodates twin outboards, recommended 200-300hp for extra power when towing other craft or handling rougher seas.
|
|
|
|
7.80 m
25' 7"
|
|
|
The sea is not static and why should a boat be? We are all individuals and we all have our ideas. Conditions and Application vary all around the world so why not build your own ASIS boat the way you want it.
The OPEN range offers total versatility and is individually designed and manufactured to meet the need and requirements of every different commercial application worldwide. With its large under-deck storage the Open boat allows you total freedom for the arrangement or storage of your equipment according to their use. The ASIS individual customization allows for the perfect set-up for your application. ASIS Open Rib’s ranges from 5.1m to 9.5m depending on your requirements and conditions you will be using the craft. Once you choose your boat, you will have the recommended list of accessories available to customize your Open for diving, fishing, water-skiing, rescue or purely commercial. The OPEN boats are built safe, strong and reliable. It’s designed deep V hull gives you the best performance and handling even in the roughest waters.
|
|
|
|
8.00 m
26' 3"
|
|
|
|
The STL is an 8m High Speed Off-Shore Patrol RIB created for extreme high speed performance in all conditions. The STL 8.0 is delivered standard with Kevlar reinforced hull structure. The Open style work deck triangulates the powerful substructure to provide a versatile accessory platform. The STL 8.0 Rigid Inflatable Boat is manufactured standard with long range fuel tanks; Black Kynar™ coated A Frame, Ullman™ Jockey Suspension Seating and many other high performance accessories. The STL is only sold as fully rigged and prepared by ASIS.
|
|
|
|
8.50 m
27' 11"
|
|
|
|
Standard equipment of the Cormoran 850 Open: Antiskid deck, tubes with double round fender, s.s. Protection in transom, lifting and towing eyes, repairing kit, spare valve, valves tool, foot pump. Sport Cormoran 850: Steering console with seat, box, windscreen, s.s. Handle for crew, crew seat with box, spray-deck seat at stern with back-rest and box, hydraulic steering for one engine, electric bailing pump, compass, aluminum fuel tank of 400 in the center and fuel indicator, hatch and solarium. Float color: Soft grey (under order can be manufactured in other colours). NEOPRENE-HYPALON.
|
|
| ... products without information |
| |
|
|
4.21 m
13' 10"
|
|
|
|
|
|
4.60 m
15' 1"
|
|
|
|
|
|
5.00 m
16' 5"
|
|
|
|
|
|
5.00 m
16' 5"
|
|
|
|
|
|
5.19 m
17' 0"
|
|
|
|
|
|
5.50 m
18' 1"
|
|
|
|
|
|
5.50 m
18' 1"
|
|
|
|
|
|
6.00 m
19' 8"
|
|
|
|
|
|
see the results for the following category : 
