Adhesive strippers

P. 1
with a wax stripper, shellac with a paint stripper, and mildew with a solution of 10% household bleach and water. If the previous finish is in good condition, wipe surface with a damp cloth and sand to ensure good adhesion. If the previous finish is in poor condition, completely remove by stripping

P. 14
- or with chemical strippers. Chemical strippers may be divided in two categories: acid or solvent based strippers are corrosive liquids, which in contact with skin may cause burns or ulcers. These strippers, after application, should be removed as soon as the coating has been softened, otherwise

P. 8
mask. ? Always wear gloves, a mask and protective goggles. ? Always sand with wet sandpaper on a wet surface, particularly with antifouling, and wear gloves, a mask and protective goggles. ? Use the water-based paint stripper AQUASTRIP to remove old paint. Dry sand or use a heat stripper

P. 45
43 1976 From the new Veneziani laboratories in the Trieste industrial estate came EVEN, the first self-leaching antifouling. 1991 Veneziani presented the first water-based stripper for hulls: AQUASTRIP. 1992 AQUASTOP Centres were created to prevent and treat osmosis. 1993 Veneziani

P. 17
are DETERSIL (a high quality degreaser). EPOXY PRIMER Two-pack adhesion primer CHARACTERISTICS A two-pack adhesion primer suitable for any type of metal surface. Providing excellent adhesion, improved corrosion protection and quick drying, this primer is particularly recommended for boats made

P. 16
with DETERSIL, then rinse with water. Follow this with a light sanding. Apply a very thin layer of ADHERGLASS, a adhesion primer for glass-fibre reinforced plastic, by brush or roller, taking care because if applied too thickly, it can lead to poor adhesion of the subsequent layers of antifouling

P. 9
. E' particolarmente adatta per l'incollaggio del teak su coperte in vetroresina. Epoxy two-can glue. It is incredibly strong on wood, fibreglass or cement. Ideal for gluing teak on fibreglass deck. TAURUS epoxy glue Speciali microfibre di vetro che, miscelate con il BARRIER, producono un

P. 15
sandpaper (n. 80 - 100) or sandblast it. Do not use worn out sand paper or metallic brushes, as they would polish the metallic surface rather than forming fine engravings, necessary for a good adhesion. If needed, remove grease or oil stains using our SOLVENT 102 ANTISILICONE. This must be done

P. 5
come base per l'applicazione di ROSTAR o BARRIER per la protezione di barche in ferro o lega. Epoxy two components primer, anti-rust for iron and anticorrosive for light alloys and lead. It has good adhesion properties and it is an excellent protective coating. It is perfect as a base for ROSTAR

P. 13
sandblasting. Remove dust using a dry cloth or an air jet (do not use any solvent otherwise adhesion to the following coat can be impaired). If necessary degrease the surface with our antisilicone solvent SOLVENTE 102 before sandblasting. Apply one coat of PRIMEPOX. Where necessary apply one or more coats

P. 11
smalto EVERGLOSS SURFACE PREPARATION Remove rust and scales from the surface through sandblasting. Remove dust using a dry cloth or an air jet (do not use any solvent otherwise adhesion of the following coat can be impaired). If necessary degrease the surface with our antisilicone solvent SOLVENTE

P. 1
Adhesives for Marine

P. 3
Market SegmentProduct Substrate DescriptionTypical Applications Page no. Spabond 540 Polyester & Epoxy GRP, plywood High toughness adhesive with working times up to 6 hours General purpose adhesive for bonding polyester GRP boats 2 Spabond 370 Epoxy, *Aged polyester GRP, teak planks

P. 2
Introduction SP-High Modulus, the marine business of Gurit, is a technical leader in the formulation of advanced epoxy resins. Spabond adhesives have been designed to offer Production, Superyacht and Race boat builders a comprehensive range of adhesives for structural bonding of polyester

P. 7
Spabond 740 Epoxy Adhesive System n Low density (0.7 S.G.) core bonding paste n Long working time for large structures Introduction Spabond 740 is a low density adhesive, with a simple 2:1 by volume mix ratio which is designed for bonding a wide range of core materials. The product is uniquely

P. 6
Spabond 730 Rapid Structural Adhesive n Reduced clamp time structural adhesive n High strength and toughness n Sag resistance of 14mm at 20°C n Available in 400ml cartridges n Gels in 10 minutes, solid in 2 hours, full properties after an overnight cure at ambient Introduction Spabond 730

P. 17
17 CEMENT INDUSTRY

P. 20
CEMENT INDUSTRY Blade reclaimers for dry materials. Bucket reclaimers for moist and sticky materials. Efficient homogenization. 20

P. 1
MACHINERY AND PLANTS FOR BRICK AND TILE FACTORIES AND THE CEMENT INDUSTRY CRUSHING GROUPS AND BULK HANDLING EQUIPMENT DRY BULK CARGO HANDLING TERMINALS

P. 16
Cement industry Different types of primary and secondary crushing groups, stationary or semi-mobile, for limestone as well as moist and sticky materials. 16

P. 21
Air-gas filtering CTP Team (Bedeschi group), a company with more than thirty years of experience in Italy and abroad, manufactures “turn key” de-dusting AIR-GAS FILTERING and noxious emissions filtering systems, for the cement and lime sectors. 21