|
|
|
Water activating lights are being lit automatically when getting in contact with water. The Regatta lifejackets for the professional market have a mounting solution for light in front. Can be mounted either outside- or in a moulded pocket solution. Water activating lights have according to SOLAS/USCG a guaranteed lifetime of 5 years, expir y date printed on the lights.
|
|
|
|
|
|
|
CONQUEROR
Codice prodotto: EPLD0005/6
This technologically superior new generation lifejacket light offers considerably increased visibility achieved by means of powerful white LED lamp.
- Virtually indestructible, it has a waterproof, corrosion, fire and temperature resistant case
- Its lamp never burns out
- Suitable for all types of lifejackets, easy to install and easy to use
- The light dome is positioned in such a way as not to create any shadow zone and guarantees equal light emission in all directions of the upper hemisphere
- Its compact size and light weight reduce transportation costs and allow for easy stowage of the lifejackets
- It is the only floating light in today%u2019s lifejacket lights market
- Special robust clip makes the light less vulnerable for tampering
TECHNICAL SPECIFICATIONS
Case Size - 70mm x 38mm x 37mm
Weight - Only 40 gr
Volume - Only 9.8 cm3
Material - Polycarbonate
Beam Angle - All directions of the upper hemisphere
Luminous Intensity - > 0.75 cd
Activation - Automatic or manual
Flash Rate - 50 < flashes per minute < 70
Lamp Type - Powerful white LED
Battery Type - Lithium, 5 years life (not replaceable)
Operational Life - Exceeds 8 hours
Operating Temperature -20%u02DAC to + 65%u02DAC (-4%u02DA F to 149%u02DAF)
Storage Temperature -30%u02DAC to 65%u02DAC (-22%u02DA F to 149%u02DAF)
|
|
hite light 0.75 candelas for 60 hours
5 years life duration
|
|
- HL8-9M manually activates with built-in switch
- Bright, steady light of .75 cd intensity visible all directions of the upper hemisphere
- Attachment tabs accommodate up to 2.5 cm (1 inch) wide webbing
- Dragon Clip™ (included) provides secure retro-fit attachment to almost any style life jacket in a matter of seconds
- Single piece construction for ease in handling during installation or in a crisis
- Compact size for ease of storage
- Operates in fresh or salt water
- Operating life - Exceeds 8 hours @ -1°C (30°F)
|
|
Sea Spark Automatic Universal Life Jacket Light
Sea Spark is a bright wide angle LED automatic universal life jacket flashing light. It is designed to fit existing life jackets and to be specified with life jacket manufactures.
This is a long-lasting, bright, easy-to-fit, flashing LED light with easy automatic function.
|
|
- Approved to IMO SOLAS, MED, MCA and RORC requirements
- Flashing "all around" light
- Battery powered
|
|
Automatic SOLAS life jacket light, 75 cm cable between battery and light, at least 4 years. For all inflatable life jackets and foam life jackets.
The new life jacket light SECULUX CFX II functions in sea and fresh water at low temperatures, and has a manual off switch. The light and battery are separate components, there are various easy ways of fitting the light, and it is easily stowed in your life jacket.
|
|
Marine Distress LED Strobe, Light Saver attaches easily to your life ring or life vest and automatically turns on when contact is made with the water. LED strobe automatically turns off when dry. Light Saver stays afloat to increase visibility in the water.
Features:
- Automatically activates in water
- Weather and wake resistant
- LED bulb life is approximately 100,000 hours
- Constructed with double insulated wiring
|
|
- Allround signalling light in different colours for general warning purposes
- Seawater resistant
|
|
Main body of corrosion resistant (seawater) light alloy. Yellow polyurethane paint.
Globe of impact resistant polyamide available in colours red, blue, amber, clear or green.
Approved according to CENELEC EN50014, 50018.
|
|
Luminaire Emergency
Tranberg luminaires are all designed for use in rough environments. It is the policy of Tranberg to provide products and services that meet the highest standards of quality in the industry and the performance needs and expectations of our customers. the design of Tranberg luminaires is based on many years of experience and extensive research in the field of professional Marine lighting. Carefully selected materials are used to ensure maximum performance, low maintenance and a long trouble free life.
|
|
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
Highly polished aluminum wide beam reflector.
Stainless steel hardware.
|
|
Class 1, Division 2, Groups A,B,C,D, T1.
Class 1, Zone 2, Group II, T1.
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
|
|
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
Highly polished aluminum wide or narrow beam reflector.
Stainless steel hardware.
|
|
EEx de IIB T5 Ex II 2 G
For use in Zone : Zone 1, Zone 2
Tranberg luminaires are all designed for use in rough environments.
The helideck light system delivered by Tranberg is designed to meet
the toughest conditions in the helicopter landing areas. The floodlights
are designed to provide adequate illumination of the whole area without
glare to pilots or helicopter personnel in the area. Helideck equipment
manufactured by Tranberg is delivered to offshore installations, oil
tankers and supply ships, hotels and hospitals all over the world.
|
|
AURA - Professional Underwater Lighting
The AURA light is the perfect solution to enhancing any waterfront location, bringing the underwater world to life in an explosion of light and color.
|
|
Docks, pilings, marinas, waterside restaurants and houses can now experience the underwater lighting phenomenon with our DV24 dock light. The light has a PVC housing with a 100 watt halogen lamp and is available in 12 volt a.c./d.c. The reflector is a 45 degree wide angle for maximum light output. The dock light is fastened to a flat surface by way of two mounting brackets. The light is fully submersible and IP68 rated.
|
|
|
|
|
|
|
Low cost - not low quality – LED underwater lighting from the industry leader.
Amphibians are the worlds first lighting collection designed to be used in or out of water. This new tough range was created firstly to satisfy the increasing demand for - high quality, - low cost - underwater lighting for smaller craft and secondly to counter the growing imports of cheap and ineffective LED underwater lighting, as we have always believed that the bitterness of poor quality remains long after the sweetness of low price.
All Amphibians utilize the latest ultra high output LED’s, have internal drivers for 12 or 12/24vDC usage, require a very low power draw with no start-up current and need a mere 8mm (5/16th) hole cut out for the cable. Utilizing unique OceanLED tritonium lensing with high tech injection moulded polymer casings resistant to all known solvents and adhesives, Amphibians are quick and simple to fit and are covered by OceanLED’s 2 year warranty. The Amphibians are exceptionally easy to install and can be used anywhere, such as;
• Transoms
• Engine Brackets
• Under the gunnels
• Trim tabs
• T-Tops
• Boat trailers for night launching.
• ROVs
• Tail gates
The A3, A6 and A12 are all now readily available in the USA, and other parts of the world, check with your local representative for details.
If its worth lighting up, then it deserves to be lit by OceanLED
|
|
The triple LED dock light (Ref. S40351) uses three 3 watt LED’s. The light is IP 68.
If this light is to be used underwater, the driver required is S41105 for each individual light.
If this light is to be used above water, the driver required is S41104 for every 2 lights.
|
|
DockGLOW lights are ideal for backyard docks, marinas, waterfront restaurants, sea walls, resorts, etc. They utilize the latest state of the art, high output, Light Emitting Diodes (LED's) as their source. DockGLOW LED's are designed to run off standard 110 Volt household current through the use of a UL certified power supply box. DockGLOW lights are available in four light colors - Cool White, Royal Blue, Cyan, and Green - to suit your individual application. The circuit board of each light has an on-board voltage regulator for increased durability and is safeguarded by a built-in thermal protection circuit.
Simply mount DockGLOW lights on the pylon, at least 6-8 inches below the water line (below the low tide water line). Then run the included 30' marine grade power supply cable to the power supply junction box (included). The cable connectors offer a simple-to-use, quick connect, which plug together in only one way.
|
|
Navigation light extremely durable to mechanical deterioration in
cast brass housing with lens of through coloured glass.
Input voltage: 12V AC/DC , 24V AC/DC
Integrated terminalbox - no need for extra connection box.
Designed for use in artic and tropical waters.
20 Years warranty on lantern.
|
|
Navigation light for vessels 20-50 meters
and over 50 meters in lenght.
Navigation light extremely durable to mechanical deterioration
in cast brass housing with lens of through coloured glass.
Input voltage: 24V AC/DC , on request all-round lights can
be supplied for 115/230V AC.
Integrated terminalbox - no need for extra connection box.
Designed for use in artic and tropical waters.
20 Years warranty on lantern.
|
|
Navigation light for vessels over 20 meters
Navigation light extremely durable to mechanical deterioration in aluminium with lens of through coloured glass.
Input voltage: 110/250V, 24V
Integrated terminalbox - no need for extra connection box.
Light source: 55Watt for vessels 20-50 meters, 85Watt for vessels more than 50 meters.
Designed for use in artic and tropical waters.
|
|
|
|
|
|
|
Commander Utility Helideck Lights Control System
The TEF 4500 Commander Utility Helideck Lights Control System (HLCS) is a complete control system for all helideck lights. Based upon the Commander Utility technology, this control system allows the control panel to be installed in the bridge or radio equipment room, while the enclosure with all other necessary components may be installed further away. Between the two a simple Cat 3 ++ cable ensures that the industry-proven RS-485 network provides a reliable two-way communication.
The control panel includes 5 buttons that control the perimeter lights, floodlights and windsock lights. In addition the panel includes a main power button for the entire system, an alarm acknowledge button and a button to dim the backlight. Three spare buttons are available, which may be used if additional components are installed in the control enclosure. Customer- specific text on buttons is optional.
Among the unique features of the system is the capability of connecting several control panels to the network, enabling full control and monitoring from several locations. Optionally a gateway may be installed to provide two-way communications to an external control system (NMEA-0183 compliant/proprietary), as well as three additional contactors and circuit breakers to make full use of the 8 control buttons at the control panel .
|
|
Navigation lights control panel for the TEF 2840/TEF 2870 Lanterns.
Main supply 24V AC/DC
Control panel series TEF4720 are designed to switch and fuse navigation and signalling lights on all kind of ships.Panels are approved and certified by DNV.
Panels are offered in three different versions, for 8, 12 and 16 lantern
|
|
Signal Lights Control Panel 230 (115)V system
For Suez, Panama- Rov- and Signal lights
The TEF 4740 control panel serie is constructed operate and monitor suez/signal lights on all kinds of vessels. Number of circuits and mimic is specified by customer.
|
|
|
|
see the results for the following category : 
